Jump to content

Starbrite

Full Members
  • Content Count

    58
  • Joined

  • Last visited

Community Reputation

21 Excellent

About Starbrite

  • Rank
    Full Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Thanks I've sent them an email Sent from the Norfolk Broads Network mobile app
  2. Just looked up total equivis but lots of different options which no. Do I get Sent from the Norfolk Broads Network mobile app
  3. Thanks for your advice the oil was in it when we bought it 2 years ago as in the picture the boat was in France and bought it from Norfolk boat sales I know nothing about hydraulic drives that's why I'm asking I've not had any trouble with the boat until it started running hot last week someone on here told me to look at the oil cooler and they right I cleaned it out but the top cracked round the bolt hole I did a repair and the temperature dropped 10 degrees so thanks for the very good advice which I will be following Sent from the Norfolk Broads Network mobile app
  4. Hi have you any details of how much oil that should be in the tank as the sight glass is a temperature gauge Sent from the Norfolk Broads Network mobile app
  5. I'm in Yorkshire and belong to a club we have brazing tackle so we will have to repair it or try to upgrade it but to take it apart it'll drop a gallon of hydraulic oil Sent from the Norfolk Broads Network mobile app
  6. I can't believe that a system put on boats in the eighties has disappeared from history this system must have been put on a lot of connoisseur s as I've got no. 109 I wonder if anyone else has the same fitting Sent from the Norfolk Broads Network mobile app
  7. Yes nordhydraulic Sent from the Norfolk Broads Network mobile app
  8. Thanks I'll give them a try Sent from the Norfolk Broads Network mobile app
  9. It's brass the bolt runs down a sleeve about an inch thinking about having it brazed but a new bit would be better Sent from the Norfolk Broads Network mobile app
  10. Can anyone tell me where I can find one of these hydraulic oil cooler for a connoisseur 2.5bmc mine has cracked round the bolt hole have tried asap and boulters Sent from the Norfolk Broads Network mobile app
  11. I thought you couldn't fly the Pennant on hire boats
  12. I have a2. 5BMC in my connoisseur I have 110 on starter and 2 135s on the domestic side works well for me. Sent from the Norfolk Broads Network mobile app
  13. Depends if one is under sail then you go behind
  14. Fabsil and seam sealer can be bought from kayospruce. com Sent from the Norfolk Broads Network mobile app
  15. In all the time I have hired boats on the broads since 1980 I've only been under the bridge 4 times mainly because of bad timing but I use to like the quietness above the bridge but plenty of other things to do now planning to come back as its a few years ago since we now have our own boat I seam to be missing out Sent from the Norfolk Broads Network mobile app
×
×
  • Create New...

Important Information

For details of our Guidelines, please take a look at the Terms of Use here.