kpnut Posted September 12 Author Share Posted September 12 Final bits sorted this morning. The tomato plants have been given a new home by Nigel’s shed and he’ll reap the bounty of the remaining harvest for his kindness. I drove the boat round to reception, Paul R took her to the slip, brought out the crane and then, just like that, she was out of the water. All that worry about nothing!! I’m pleasantly surprised by how good she looks underneath. I was expecting to see the prop virtually half eaten away and the rudder all bent. Don’t know why, just did! So that’s me done for a good few weeks/months - who knows? Lulu sent me a lovely photo of her mooring at Boundary Farm. I miss it already 😢 15 Quote Link to comment Share on other sites More sharing options...
Broads01 Posted September 12 Share Posted September 12 So what have you specified for the repaint, Kate? Quote Link to comment Share on other sites More sharing options...
kpnut Posted September 13 Author Share Posted September 13 7 hours ago, Broads01 said: So what have you specified for the repaint, Kate? There are so many people worried she’ll be a different colour, but she’s staying ‘as is’ and will be totally recognisable once done. While I can’t remember the name of the paint etc it’ll be 2 pack etc after thorough prep, windows out and all that. Colour exactly as now, with nonslip on decks. And a navy ‘go faster’ stripe near the antifoul line and maybe a navy band under the toerail. Hopefully I can keep the existing bin iron, as I want to keep her looking her age. If not, it’ll be a stainless steel rubbing strake. And keeping the existing cleats as again, they look right for the boat. Still keeping the rubber round the front as protection against me! Anode fitted as there hasn’t been one before. I’m having the transom cut out to future proof me/husband getting on board and adding fenders to the front bow sides, maybe adding corner fenders on the stern corners too as I have been knocked there a couple of times. Probably missed something from the above list. 15 Quote Link to comment Share on other sites More sharing options...
SwanR Posted September 13 Share Posted September 13 Hope everything goes according to plan this time round Kate. 🤞 1 Quote Link to comment Share on other sites More sharing options...
Gracie Posted September 13 Share Posted September 13 So glad you are keeping her in her original colours, she's a legend I hope it all goes well Kate and my goodness are you going to miss her for a while, time flies though, you'll soon be reunited with her soon enough Grace x 1 1 1 Quote Link to comment Share on other sites More sharing options...
NeilB Posted September 13 Share Posted September 13 Don’t know if you already have them but centre cleats are really useful, especially when single handed. 4 Quote Link to comment Share on other sites More sharing options...
marshman Posted September 13 Share Posted September 13 And for springs! 2 Quote Link to comment Share on other sites More sharing options...
Troyboy Posted September 13 Share Posted September 13 I can't wait to see the finished results Kate. I'm pleased that you are keeping her the same colour. 2 1 Quote Link to comment Share on other sites More sharing options...
OldBerkshireBoy Posted September 13 Share Posted September 13 It is a good time to check the rudder bearings whilst it is out of the water if that isn`t on the list. 2 Quote Link to comment Share on other sites More sharing options...
YnysMon Posted September 13 Share Posted September 13 Isn’t this forum great…lots of helpful suggestions for Kate here. Love that you are sticking with the same colour too Kate. 1 2 Quote Link to comment Share on other sites More sharing options...
Lulu Posted September 13 Share Posted September 13 Can’t wait to see her in all her new finery. It will be worth the wait x 1 1 Quote Link to comment Share on other sites More sharing options...
PaulN Posted September 13 Share Posted September 13 Look forward to seeing her all dolled up Kate. Pleased she will be in the same livery so we can easily recognise you as usual. 2 Quote Link to comment Share on other sites More sharing options...
Roy Posted September 13 Share Posted September 13 Hi Kate glad you are keeping the orange I think it suits the horizon 35s and it’s nice to keep it original. Roy 2 Quote Link to comment Share on other sites More sharing options...
kpnut Posted September 13 Author Share Posted September 13 22 hours ago, NeilB said: Don’t know if you already have them but centre cleats are really useful, especially when single handed. I had a long discussion with Paul about centre cleats. I'd already bought two matching ones at the boat jumble at Norwich last year for just that job. But we came to the conclusion that fitting the one on the starboard side would be easy peasy, but the port side would either entail removing the kitchen (not a chance) and fuel tank is I wanted it put in the most sensible place, or not having a supporting plate underneath. And I'm really not keen on that. I don't like the idea of having one on one side only and decided I've managed OK up till now so I've abandoned the idea. One cleat will come in handy though as I have an odd shaped one at the back, so that'll get replaced. 20 hours ago, OldBerkshireBoy said: It is a good time to check the rudder bearings whilst it is out of the water if that isn`t on the list. It will be. Is that the cutlass bearing? All that metalwork underneath will be given a good check-over. I'll get the stern gland repacked too,(unless you lot or Paul etc say don't be daft) - it probably doesn't actually need it as it was done in 2021 and has been behaving itself beautifully, with my daily 'turn of the screw' (remote greaser). I don't know how often it should be done. And by the way, Brian at LBBY managed to repack it with the boat in the water, took him about half hour all told and that included time explaining to me what he was doing. 4 Quote Link to comment Share on other sites More sharing options...
kpnut Posted September 13 Author Share Posted September 13 10 hours ago, OldBerkshireBoy said: It is a good time to check the rudder bearings whilst it is out of the water if that isn`t on the list. Actually, maybe I do know the cutlass bearing is in a different place than rudder bearings. Is the cutlass bearing something to do with play on the prop shaft? Anyway, all will be checked. I did have some fishing line wound the prop shaft, not much so hope it hasn't worn anything. Paul said if I was ever clearing it myself to be careful of hidden fishing hooks. 1 Quote Link to comment Share on other sites More sharing options...
kpnut Posted September 13 Author Share Posted September 13 4 hours ago, Roy said: Hi Kate glad you are keeping the orange I think it suits the horizon 35s and it’s nice to keep it original. Funnily enough Roy, the silver gems' original colour was grey. I suppose grey is rather more like silver than orange is. I was pondering it at one point, but decided that light grey makes it look a bit drab and flat. And orange sort of suits my use of the boat - a bit quirky what with my tomatoes and one group of friends who insist on dressing up as pirates and frightening kids on passing boats! Most embarrassing. 5 3 Quote Link to comment Share on other sites More sharing options...
YnysMon Posted September 13 Share Posted September 13 7 minutes ago, kpnut said: and one group of friends who insist on dressing up as pirates and frightening kids on passing boats! Most embarrassing. Can I meet your friends? They sound like fun! 1 3 Quote Link to comment Share on other sites More sharing options...
OldBerkshireBoy Posted September 14 Share Posted September 14 12 hours ago, kpnut said: Actually, maybe I do know the cutlass bearing is in a different place than rudder bearings. Is the cutlass bearing something to do with play on the prop shaft? It is yes whilst the rudder bearings are on the vertical round section of the rudder (as seen in the last of the photos). 1 Quote Link to comment Share on other sites More sharing options...
webntweb Posted September 14 Share Posted September 14 13 hours ago, kpnut said: Funnily enough Roy, the silver gems' original colour was grey. I suppose grey is rather more like silver than orange is. I was pondering it at one point, but decided that light grey makes it look a bit drab and flat. Weren't the Silver Gems originally Golden Horizons. I suppose orange would be as near to gold as they could get. 1 Quote Link to comment Share on other sites More sharing options...
kpnut Posted September 14 Author Share Posted September 14 2 hours ago, webntweb said: Weren't the Silver Gems originally Golden Horizons. I suppose orange would be as near to gold as they could get. it does confirm that on Craig's database. But it was Paul who told me its original colour was grey. And there's certainly grey gelcoat under the white paint of the sunroof. 2 Quote Link to comment Share on other sites More sharing options...
MargeandParge Posted September 14 Share Posted September 14 We recon you've left her in very safe hands. Seen boats with two pac and as good a finish as gel coat but more durable. Kindest Regards Marge and Parge 1 Quote Link to comment Share on other sites More sharing options...
kpnut Posted September 14 Author Share Posted September 14 3 hours ago, MargeandParge said: more durable I’m going to be scared stiff of knocking her, at least till I’ve done the first scrape. So I hope it is durable to cope with me! 2 Quote Link to comment Share on other sites More sharing options...
YnysMon Posted September 14 Share Posted September 14 1 hour ago, kpnut said: I’m going to be scared stiff of knocking her, at least till I’ve done the first scrape. So I hope it is durable to cope with me! I bet you'll feel like those canal boat owners who get their boat's 'bottom's' blacking redone and then immediately have a dink in the first lock they go through. 1 Quote Link to comment Share on other sites More sharing options...
Dan Posted September 14 Share Posted September 14 7 hours ago, kpnut said: it does confirm that on Craig's database. But it was Paul who told me its original colour was grey. And there's certainly grey gelcoat under the white paint of the sunroof. They did stay in the grey gel for quite a while when they were transferred over from Horizon Craft... here is my Mum and our Springer on the back of Silver Gem 2 in 1996 as proof! 8 1 Quote Link to comment Share on other sites More sharing options...
Dan Posted September 14 Share Posted September 14 ...and one of yours out on it's holidays in 2010, and one at her home from 2004 6 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.