FairTmiddlin Posted January 29, 2019 Share Posted January 29, 2019 20 hours ago, grendel said: surely that would require lowering the yardarms, since the sun would have to be over them. You are talking Navy rules I'm talking Griffs rules RULE I Subsection 1 If the suns visible or not It's drinking time. 1 1 Quote Link to comment Share on other sites More sharing options...
ranworthbreeze Posted January 29, 2019 Share Posted January 29, 2019 1 hour ago, FairTmiddlin said: You are talking Navy rules I'm talking Griffs rules RULE I Subsection 1 If the suns visible or not It's drinking time. That might be why Griff has the lads week in autumn rather than in summer Regards Alan 1 Quote Link to comment Share on other sites More sharing options...
LondonRascal Posted January 30, 2019 Share Posted January 30, 2019 All this showing off Masts - ha! I say, get yourselves a proper structure and be done with it 3 Quote Link to comment Share on other sites More sharing options...
FairTmiddlin Posted January 31, 2019 Share Posted January 31, 2019 Ah but they are talking about lowering masts to go under potter NOT HADDISCOE 2 Quote Link to comment Share on other sites More sharing options...
BroadAmbition Posted February 3, 2019 Author Share Posted February 3, 2019 If only Robin could get Indy up the Thurne to Potter, then there would be a fair chance he could go through PHB! Griff 1 Quote Link to comment Share on other sites More sharing options...
BroadAmbition Posted February 3, 2019 Author Share Posted February 3, 2019 So the Mast MkII, The design is done. Pete the Wizard has in my absence has been having a sneaky hour or so on his own in his workshop without me. He has planed down what will be the centre spine of the mast, realising that the teak planks I had provided were not long enough he has grooved / splined and fastened two bits together making it over length ready for the next round. I could not see the join at first - Well chuffed. The design may not come out very well on the photo's as the pencil lines are not that dark / thick but you get the gist, Griff 3 Quote Link to comment Share on other sites More sharing options...
grendel Posted February 3, 2019 Share Posted February 3, 2019 that is a pretty close match across the splice, cant wait to see the finished product. Quote Link to comment Share on other sites More sharing options...
BroadAmbition Posted February 13, 2019 Author Share Posted February 13, 2019 So, back on topic / track. I arrived onboard Thursday 07th evening earlier for a change at 2200-ish along with the Rascal. Friday morning after a welcome breakfast at Stalham High Street, we commenced, or 'Turn To' Now where was I? - Oh yes that cant rail. De-nibbed, lint free cloth and more varnish. Thing is the wet shed is well, wet when it rains, that is to say there are a fair few rainwater leaks that land on 'B.A' is it most annoying. I have to site cloths to catch the drips to keep areas dry so I can varnish, it's a right Royal pain in the derrière. The low temperatures at this time of year don't help either but Ravilakk dries faster than most and copes very well with the conditions. Then it was onto those teak light pads. I made these with a mate at home months ago now. It was now time for their final shaping / sanding, small groove out of the back for the cable to sit nicely and was then at last able to put them in place. Then commenced yet more varnishing. Rascal and Paul T meanwhile erected a storage locker behind Trixie's berth. This enabled them to clear out a fair amount of stuff from 'B.A's locker, then they really went for it and sorted out 'B.A's locker entirely. We now have all our boat jumble stuff ready for Beccles later on in the year and we can actually see space in our locker once more - Wonders never cease The CCTV cameras got adjusted / re-sited with some Rascal tweaking to the system. Paul T commenced making some new larger shelves for the quarter berth which I completed Sunday (More varnishing to be done) The Radio / CD player. I at last fashioned a new surround for it out of our 'No Name' hardwood and commenced with the varnish on that too. Saturday afternoon late on after the gale has decreased to a stiff breeze and more importantly the rain stopped we took 'B.A' out for a short run to the Southern end of Barton Broad and back, primarily to test out the two inboard DAB and FM aerials - They were spectacular - that is spectacularly rubbish and did not perform well at all. This was good news as it stopped us putting back the deckhead lining and respective boxing in in the Stbd Fwd cabin. After consequent discussions we now know the way ahead. The Rascal is ordering a combined DAB/FM aerial that will be mounted on the outside of 'B.A' this will mean more cable runs above the deck head lining and a 12v booster fitting but we are confident it will be a success - Time will tell. The shower extract pump has at last had it's service kit fitted and is once again back to its best Those expensive s/steel mirror finish borders for the hatches were collected and with us. The hatches have for some time not been sitting perfectly flush with the surrounding deck. Time to put that right. More 'No Name' hardwood bonded in place with west system fast set resin. 'Fast' ? - Really? It was Monday before it had cured sufficiently. Then I had to grind out slots in the s/steel to facilitate a snug fit around the cabin sides. Some soft rubber wx seal applied under the edges of the borders and Da Daaaaahhh , Bobs your Dads Brother and Fanny is your Aunt. I must admit to being pleased with them. The well deck hatch cover has now gone off to have a similar border made for it. Those two 12v demister fan things arrived. Unfortunately the 'GriffTile' van 12v socket has developed a fault so I could not test them out. The first time this happens now will be when we actually need them to be used onboard. So what's to be done / outstanding? 1 x more coat of Ravilakk to led pads and shelves. Final Brave top coat to cant rail, Pads, shelves, Radio surround. Aerial with associated cables, power booster to be fitted, Stbd Fwd cabin put back together. Tv booster to be fitted / wired under helm. new 3 x position switch to be fitted / wired, replace our very old / tired tube strip lamp above our locker with a LED version (Should have done this one years ago) blah blah blah etc for the next visit early March I've bound to have forgotten sommat or t'other here but that's good enough for now. Phot's should sort of follow on /make some sort of sense out of it all - He says optimistically Griff 2 Quote Link to comment Share on other sites More sharing options...
BroadAmbition Posted February 14, 2019 Author Share Posted February 14, 2019 2 Quote Link to comment Share on other sites More sharing options...
BroadAmbition Posted February 14, 2019 Author Share Posted February 14, 2019 5 Quote Link to comment Share on other sites More sharing options...
Jbx5 Posted February 14, 2019 Share Posted February 14, 2019 With all the chrome bits and jazzy new radio is BA short for Bling Afloat now Charlie😂 John 2 Quote Link to comment Share on other sites More sharing options...
BroadAmbition Posted February 14, 2019 Author Share Posted February 14, 2019 Ha ha - Good one. Point of order though, it’s 316 grade stainless, no chrome Griff Quote Link to comment Share on other sites More sharing options...
grendel Posted February 14, 2019 Share Posted February 14, 2019 but it does reflect a good view up your nostrils Charlie. Quote Link to comment Share on other sites More sharing options...
BroadAmbition Posted February 14, 2019 Author Share Posted February 14, 2019 Really? I can’t remember using a wide angle lense Griff 1 Quote Link to comment Share on other sites More sharing options...
grendel Posted February 14, 2019 Share Posted February 14, 2019 well I was going to make a comment about the need to warn the ladies to be circumspect when stepping aboard, but ...... 1 Quote Link to comment Share on other sites More sharing options...
BroadAmbition Posted February 14, 2019 Author Share Posted February 14, 2019 I have been champing at the bit so to speak to get into the Wizards workshop and crack on with 'B.A's new mast. To date it hasn't happened but I can't really ring him and start badgering. Then earlier this evening at around 2000, I'm on my way back home form doing yet another estimate when the Wizard himself rings me. Wants to know the diameter of the power cable for the Nav Lights as he has nearly finished 'B.A's mast - WHAT? I'm supposed to be assisting and more importantly learning but the crafty bugler has cracked on with it without telling me. I went home, grabbed said elec cable and took it round to him. As you can see from the photo's there ain't much left to do now. The tear-drop for the anchor light (And that is shaped and nearly finished), shape off the ends of the yards and a few other minor items. He needs some turned No 8 brass cups - I've ordered them. It won't be much longer before I can do my bit and get started on the varnishing in our conservatory, thing there is that the Ravilakk, Brava and genuine turps is down in our wetshed Locker, never mind we are due down in a couple of weeks again. The mast has been fashioned form those lumps of Teak and No Name hardwood photo's posted earlier. This really is gonna be a right Bobby Dazzler when it's finished Griff 3 Quote Link to comment Share on other sites More sharing options...
grendel Posted February 14, 2019 Share Posted February 14, 2019 looking good - though thats going to be a pain to reproduce, I can see it now... Quote Link to comment Share on other sites More sharing options...
BroadAmbition Posted February 14, 2019 Author Share Posted February 14, 2019 Peter - Not a prayer, too fiddly at 12th scale. Suggest you do the same design but don't cut out the holes in the spine and make the spine the same thickness bottom to top. Obviously those two routed grooves will be covered by a dressing piece on the front. Griff Quote Link to comment Share on other sites More sharing options...
grendel Posted February 15, 2019 Share Posted February 15, 2019 Griff, Watch this space, nowt like a good challenge. thats part of the fun of it all. 1 Quote Link to comment Share on other sites More sharing options...
grendel Posted February 17, 2019 Share Posted February 17, 2019 On 14/02/2019 at 22:02, BroadAmbition said: I have been champing at the bit so to speak to get into the Wizards workshop and crack on with 'B.A's new mast. To date it hasn't happened but I can't really ring him and start badgering. Then earlier this evening at around 2000, I'm on my way back home form doing yet another estimate when the Wizard himself rings me. Wants to know the diameter of the power cable for the Nav Lights as he has nearly finished 'B.A's mast - WHAT? I'm supposed to be assisting and more importantly learning but the crafty bugler has cracked on with it without telling me. I went home, grabbed said elec cable and took it round to him. As you can see from the photo's there ain't much left to do now. The tear-drop for the anchor light (And that is shaped and nearly finished), shape off the ends of the yards and a few other minor items. He needs some turned No 8 brass cups - I've ordered them. It won't be much longer before I can do my bit and get started on the varnishing in our conservatory, thing there is that the Ravilakk, Brava and genuine turps is down in our wetshed Locker, never mind we are due down in a couple of weeks again. The mast has been fashioned form those lumps of Teak and No Name hardwood photo's posted earlier. This really is gonna be a right Bobby Dazzler when it's finished Griff On 14/02/2019 at 22:21, BroadAmbition said: Peter - Not a prayer, too fiddly at 12th scale. Suggest you do the same design but don't cut out the holes in the spine and make the spine the same thickness bottom to top. Obviously those two routed grooves will be covered by a dressing piece on the front. Griff On 15/02/2019 at 10:30, grendel said: Griff, Watch this space, nowt like a good challenge. thats part of the fun of it all. just a test run with no measurements, but I do think I can get a similar appearance. 2 Quote Link to comment Share on other sites More sharing options...
grendel Posted February 17, 2019 Share Posted February 17, 2019 the slots were machined in using a 3mm milling bit. 1 Quote Link to comment Share on other sites More sharing options...
BroadAmbition Posted February 17, 2019 Author Share Posted February 17, 2019 Amazing but aren't we on wrong thread with regards to a record of progression etc? Griff 2 Quote Link to comment Share on other sites More sharing options...
grendel Posted February 17, 2019 Share Posted February 17, 2019 yes, I will post over there too, I just wanted to answer you here first. Quote Link to comment Share on other sites More sharing options...
BroadAmbition Posted February 17, 2019 Author Share Posted February 17, 2019 Understood, I miss nowt on t'other thread Griff Quote Link to comment Share on other sites More sharing options...
BroadAmbition Posted February 18, 2019 Author Share Posted February 18, 2019 The s/steel ring pulls that are fitted to Port n Stbd deck hatches along with the well deck hatch - Well I have come to realise they aren't all they are cracked up to be. They get deformed over time and the springs break. There ain't enough metal and too much air. One of them needs replacing again. So stuff it, another upgrade to three 316 grade s/steel, much thicker with less air and no springs. This'll sort it once and for all Griff 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.