Sunny Posted April 9, 2010 Share Posted April 9, 2010 Hi all, the p.r.v on my calorifier has failed can anyone tell me what pressure it should be as there are no marking on it,The engine is a bmc 1.5 and runs at 82 deg the calorifier is the old type copper cylinder approx700mm long x 450mm dia. Thanks Steve Quote Link to comment Share on other sites More sharing options...
jimbo Posted April 9, 2010 Share Posted April 9, 2010 I am fairly sure the one on mine is 2.5bar Steve, hope that helps. Welcome to the forum by the way Quote Link to comment Share on other sites More sharing options...
Sunny Posted April 12, 2010 Author Share Posted April 12, 2010 Hi Jimbo. Thanks for the info on the P.R.V i will be down this weekend, so a trip to wroxham marine should sole the problem as they seem to stock quite a few. Thanks again Steve Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.