fishfoxey Posted May 29, 2021 Share Posted May 29, 2021 Hi am I correct in thinking that under the t bar screw at the top there will be some kind of filter? If so is it just a case of unscrewing and removing or will diesel spew out everywhere. Thanks Quote Link to comment Share on other sites More sharing options...
NeilB Posted May 29, 2021 Share Posted May 29, 2021 Here you go, service manual and parts list. https://www.separ.co.uk/wp-content/uploads/2019/12/kwa.pdf There should be a shut off valve somewhere but you may still spill some diesel. Any doubts then I would seek the assistance of a local boatyard. 1 Quote Link to comment Share on other sites More sharing options...
annv Posted May 30, 2021 Share Posted May 30, 2021 Yes first turn of isolating tap/valve on or near tank then place rag then a bowl to catch any spillage then clean replace the sealing rings with a smear of grease this helps to settle and keeps in place, as you screw retaining bolt spin/turn cover to make sure it is centralised, turn tap on and bleed. John Quote Link to comment Share on other sites More sharing options...
fishfoxey Posted May 30, 2021 Author Share Posted May 30, 2021 35 minutes ago, annv said: Yes first turn of isolating tap/valve on or near tank then place rag then a bowl to catch any spillage then clean replace the sealing rings with a smear of grease this helps to settle and keeps in place, as you screw retaining bolt spin/turn cover to make sure it is centralised, turn tap on and bleed. John Thanks for the info Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.