easyrider Posted September 14, 2014 Share Posted September 14, 2014 Hi all, I've finally got the front window out of my boat but the frame is in a bit of a state so will be replacing it with a rubber one (as in a car windscreen). What would be the best way of cleaning up the grp around the window apperture without causing too much damage to it? Thanks for any help/advice you may have Quote Link to comment Share on other sites More sharing options...
MBA Marine Posted September 14, 2014 Share Posted September 14, 2014 that would depend on what it was stuck in with. if its a Arbomast style sealant then a homemade scraper made from a scrap bit of perspex will be great, but if its been put in with something stronger then I would look to a 'stanley' blade style scraper but be careful stand it up at too high a pitch and it will dig in. I would have to question the going over to rubber, can you not have the old window refurbed? also will the rubber cover the marks and old fixing holes from the window? you may end up with a nightmare making good the old scaring. Quote Link to comment Share on other sites More sharing options...
Hockham Admiral Posted September 14, 2014 Share Posted September 14, 2014 We had all our windows re-furbished last year by Tony Burford in Brundall. We were well pleased! He specialises in marine windows only and is very approachable. http://www.yell.com/biz/tony-burford-marine-windows-norwich-5792368/ Quote Link to comment Share on other sites More sharing options...
JawsOrca Posted September 14, 2014 Share Posted September 14, 2014 Hi, to second what mark said. we found silicon eater did a good job at cleaning the surface and followed by a careful sand. Personally I would recommend replacing windows like for like.. I believe a boat with mismatched or non-original windows would effect the sale of the boat (but thats just me).. We refitted the frames used arbomast BR which is a brilliant product (better than silkaflex) as it doesn't cure.. our windows leaked like a sieve before we removed and refitted with this.. (Use black silkaflex to reinstall the glass to the frames if you are doing that) A good friend of ours, Jean-pierre restores windows although he's in maidstone (Hadlow Marine) (I notice you are showing as rainham essex).. if you have the windows I'm sure he can help..he can supply everything marine window including the rubber www.hadlowmarine.co.uk. Good luck. Quote Link to comment Share on other sites More sharing options...
ranworthbreeze Posted September 14, 2014 Share Posted September 14, 2014 Hello Jim, Here is a link to the people we have currently on our service section that do window repairs:-http://www.thenorfolkbroads.net/forum/forum/203-boat-window-repairs/RegardsAlan Quote Link to comment Share on other sites More sharing options...
MBA Marine Posted September 14, 2014 Share Posted September 14, 2014 Hello Jim, Here is a link to the people we have currently on our service section that do window repairs:-http://www.thenorfolkbroads.net/forum/forum/203-boat-window-repairs/ Regards Alan I think that list could do with a update, there is 'Trevor Preace'(not sure how thats spelled will have to get a card out from the van) and I think there is two boat window firms on Hoveton ind estate, im sure there are many more that I have not used. Quote Link to comment Share on other sites More sharing options...
ranworthbreeze Posted September 14, 2014 Share Posted September 14, 2014 Hi Mark, If you PM the details I will add them to the list. I already have to add Tony to the list. Regards Alan Quote Link to comment Share on other sites More sharing options...
easyrider Posted September 15, 2014 Author Share Posted September 15, 2014 Thanks for the help and advice. I'm afraid that the old frame is well past it;s sell by date so I will be going for the rubber option. As I'm working to a budget....ish my brother is giving me a hand to replace the window which will work out considerably cheaper, he's a builder and decorator by trade and said he will be able to do the job. Will let you know how it goes. Thanks again for the advice and links Quote Link to comment Share on other sites More sharing options...
Oddfellow Posted September 16, 2014 Share Posted September 16, 2014 A ali frame window (I assume that's what we are talking about) has to be beaten to a pulp before it's unrepairable. Window rubbers will only be remotely effective for windows with radius corners and are notoriously difficult to seal, especially for someone who is inexperienced in fitting them. Here is a serious point - you may be on a budget now, but what costs will you encur if the window leaks and damages everything beneath it? Trevor Preece is a magician when it comes to refurbishing these windows. I urge you to reconsider the rubber surround route 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.