pks1702 Posted November 17, 2009 Share Posted November 17, 2009 As Ian said, how often do you have the conditions to get on a full plane on the North Sea anyway. I agree which is why I went for an SD John Moxon also knows a bit about hull design Quote Link to comment Share on other sites More sharing options...
mbird Posted November 17, 2009 Share Posted November 17, 2009 Thanks for the info guys. I guess there's only one way to find out, and that's to take the P33 for a spin By the way...erm, dunno how to ask this without looking a dickhead ..... ok .... here goes..... When at the helm, how do you know when a boat gets up on the plane? (I've never been in one, see ). If I take the P33 for a spin and it does 14kts on the Bure, that's gonne feel really fast, but how will I be able to tell if it's planing? Quote Link to comment Share on other sites More sharing options...
Guest chriscraft Posted November 17, 2009 Share Posted November 17, 2009 hi i,l have a go at it, first open thottles to stops engine starts to pick up speed slowly bow rises bowwave is enormous engine,s pick up more revs bow dips slightly engine,s now at full chat bowave flattens out engin,s seem happier!! your planning thottle back to crusing speed. Quote Link to comment Share on other sites More sharing options...
Antares_9 Posted November 17, 2009 Share Posted November 17, 2009 Chriscraft gives as good an explanation as I’ve seen Mark. Problem is all taking one on the Bure will tell you is that it will achieve X speed and nothing more. It will not be any sort of a trial of the gear and engines as they will not be going for anywhere near long enough. It will not tell you how the boat handles under the conditions you will use it at that speed after you take ownership. I guess if you like that trial enough though, you could possibly get a proper sea trial or at least a good hour at speed back and forth over Breydon to really test the beast. Quote Link to comment Share on other sites More sharing options...
Guest chriscraft Posted November 17, 2009 Share Posted November 17, 2009 hi Mark, i would be very suprised ,if a 33 would achieve 17 knots with 130,s fitted,i would imagine that this is the design speed of the hull,33,s weigh about 5.5 tons,and there is one for sale here http://www.boats.com/boat-details/Princess-33/20459191 with 400hp,stated speed 20knots?? Quote Link to comment Share on other sites More sharing options...
Antares_9 Posted November 17, 2009 Share Posted November 17, 2009 Another thing worth remembering is that they are unlikely to still be capable of putting out the origonal 130 now, best thing is suck it and see. As has been said many times the speed of the boat is often unimportant as your actual speed is governed by the sea state anyway, apart from the odd diamond days most north sea coastal cruising is rust. No less enjoyable, in fact possibly more but rust nevertheless. Quote Link to comment Share on other sites More sharing options...
pks1702 Posted November 17, 2009 Share Posted November 17, 2009 Thats the one I pointed out to Mark a few weeks ago. Sale Pending can mean a multitude of things.... as Kiki came from Boatshowrooms I know the team well and they speak as they find. If you sell its worth a call Mark. Quote Link to comment Share on other sites More sharing options...
mbird Posted November 18, 2009 Share Posted November 18, 2009 Thanka for the simple explaination Trevor. Never having experienced it, I really don't know what to expect The little quanrdy I have is that we quite like the P33 MkII at NYA with the 130's. It's on shafts, reasonably small engines for river work etc. However, in my naive way, I would have thought buying a boat with a planing hull that can only ever be used in displacement mode would be a bit daft. Top speed is not my issue, but if the P33 cannot acheive the plane with 130's in it, then surely it is going to be more efficient and sensible to simply look for a SD hull or a P33 with bigger engines isn't it? Quote Link to comment Share on other sites More sharing options...
mbird Posted November 18, 2009 Share Posted November 18, 2009 Thats the one I pointed out to Mark a few weeks ago. Sale Pending can mean a multitude of things.... as Kiki came from Boatshowrooms I know the team well and they speak as they find. If you sell its worth a call Mark. Hi Perry, Yes we had a look at those details a couple of weeks back. When we sell, we will start to look a little further afield than Brundall . At the moment it is more a case of weighing up the pros and cons of various designs etc so when we do get the reddies... er... ready, we will know what we are after. It's odd, as when we were looking for our river cruiser, we know exactly what we were after and found it within about 3 weeks. When it comes to sea boats, though, we are a bit at a loss to know what we want. Quote Link to comment Share on other sites More sharing options...
pks1702 Posted November 18, 2009 Share Posted November 18, 2009 Selecting a sea boat can present a bit of pondering selecting a boat that will do that and be happy and manageable on the rivers - well that is harder Quote Link to comment Share on other sites More sharing options...
seaboater Posted November 18, 2009 Share Posted November 18, 2009 As all us (ex)salties know from bitter experience, you can go to sea on a lovely day, and before you know it, you're miles from home port and the weather and seas can turn very rough, very quickly. It's worth bearing in mind that if you have to call for help in such conditions, the boat which comes out to you will have a semi-displacement hull! It's the best compromise of seaworthiness and speed, and also helps you not to blow about so much when on the rivers. Quote Link to comment Share on other sites More sharing options...
mbird Posted November 18, 2009 Share Posted November 18, 2009 Next question ..... Give me some examples of semi displacement hulls then (I know about Birchwoods thanks to Jonathon and Barry ). By the way, we got an offer on ours today, so it looks like a sale could be imminent! Quote Link to comment Share on other sites More sharing options...
Guest chriscraft Posted November 18, 2009 Share Posted November 18, 2009 Broom!! Broom! Aquafibre i think Quote Link to comment Share on other sites More sharing options...
Guest chriscraft Posted November 18, 2009 Share Posted November 18, 2009 Broom qcean 37 about 45k?? 16 knots@sea Quote Link to comment Share on other sites More sharing options...
mbird Posted November 18, 2009 Share Posted November 18, 2009 Thanks Trevor. I've seen that one advertised already, but from memory it was quite old I think. Still might be worth a look though! The problem I have found with Brooms is they tend to be very pricey for their age and condition. Quote Link to comment Share on other sites More sharing options...
Guest chriscraft Posted November 18, 2009 Share Posted November 18, 2009 Tes i agree really too much money for age of boats, Quote Link to comment Share on other sites More sharing options...
pks1702 Posted November 18, 2009 Share Posted November 18, 2009 Bit more on hulls http://books.google.co.uk/books?id=my71 ... ls&f=false No problem in suggesting Brands with SD hulls I think the issue is at what budget. Simon did lots of research on this area relatively recently so might be better placed to help Quote Link to comment Share on other sites More sharing options...
Guest chriscraft Posted November 18, 2009 Share Posted November 18, 2009 Now how about one of these,a semi disp hull with a keel?/this one 74k 2002Falcon 32 (Stelco 32 Capriole) (BBM032) Quote Link to comment Share on other sites More sharing options...
mbird Posted November 18, 2009 Share Posted November 18, 2009 That's pretty Trevor. I would have thought that would be a planing hull though! If they knock 40k off the price I'll have it Quote Link to comment Share on other sites More sharing options...
Guest Posted November 18, 2009 Share Posted November 18, 2009 As far as I know all birchwoods have semi displacement hulls, so a good place to start, also 33ft plus in the water for the east coast is good to clear onto the second ware. this is a video I posted on youtube of two 37 ft s/d boats and a 31ft planing. I think the broom at the back has more of a planing sd hull and the ts a full sd hull. The Sealine in the middle could have flattened the sea with 30 kts and balls of steel Jonathan Quote Link to comment Share on other sites More sharing options...
Happy Jax 3 Posted November 18, 2009 Share Posted November 18, 2009 It seems an error as occurred with the clip Jonathan. Shame I was looking forward to it. I will try again later. Quote Link to comment Share on other sites More sharing options...
Happy Jax 3 Posted November 18, 2009 Share Posted November 18, 2009 Forget my last post, just got in. Quote Link to comment Share on other sites More sharing options...
senator Posted November 18, 2009 Share Posted November 18, 2009 Sticking between 2 SD's is a bit too slow, Clanny was just and I mean just on the plane at 14 knots and trying very hard to go back down so the back was heavy,the legs were tucked in and the tabs were down, at 20 Knots she looks a lot better, that said the sea had hardly anything on it so it does show you what the sea will do and when you are down to 8 Knots it can get very bumpy in a swayie sort of way. A sea like the one on the video is great fun on a planing boat once you are properly up on top but any more and the slamming starts to worry you a bit. THe problem is that you are unlikely to get a sea trial in conditions you are going to spend most of your time in so read, read some more and then read a bit. Go for a boat that is known to have a good sea hull, SD or planing, don't even think of going displacement due to sharons need to get rid of her dinner when moving. Condition is everything on the age of boats you are looking at, remember you could very easily spend more than you paid for the boat trying to put it right if you buy a bad one. Good luck with both the sale and the hunt. Ian Quote Link to comment Share on other sites More sharing options...
Guest Posted November 19, 2009 Share Posted November 19, 2009 I agree with Ian, amongst others. A sea trial on the Yare might show you absolute top speed but it won't necessarily be a guide to handling in sea conditions which can obviously be extremely variable and more difficult conditions will likely sap a lot of the power. But I seriously doubt that any local brokers will actually allow you to take the boat to sea or even to Breydon for a more thorough test, not unless you were packing a 6 figure budget anyway. Perry suggested I might have something to add on the subject of SD hulls and he's right that I spent a lot of time looking at what's available but I am afraid several years worth of research on broker's sites, visiting boats and asking for advice on models to look at basically always looking at the same two marques - Princess and Fairline and even then only at a handful of models. Obviously there were many, many other makes and models considered but none making the final cut for a variety of reasons. I really liked the P33 and, had we had kids to consider, that's probably the route we would have gone down but we didn't need the extra size. Quote Link to comment Share on other sites More sharing options...
thirdmate Posted November 19, 2009 Share Posted November 19, 2009 Found a lovely P37 down south (Kent) was due a sea trial yesterday, but for some reason the broker lost his bottle. Something about to much wind !!!!!! Mind you he was probably right. Andy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.