CapitainFrenchy Posted April 20, 2022 Share Posted April 20, 2022 Hello all. I have to re-engine the boat and am considering installing a BETA-MARINE type 85T engine. Do you use and know this brand well and especially this model? The engine data sheet indicates various curves and especially fuel consumption. Is the fuel consumption curve real, or representative of this model and type of engine? Happy browsing everyone. Quote Link to comment Share on other sites More sharing options...
grendel Posted April 20, 2022 Share Posted April 20, 2022 a lot will be dependent upon the boat you have, 85hp seems a bit overkill for most broads boats, ok if its seagoing but on the broads you will barely be using more than tickover and might struggle with the lower speed limits. 1 Quote Link to comment Share on other sites More sharing options...
Mouldy Posted April 20, 2022 Share Posted April 20, 2022 Your profile suggests that you are based in France. On that basis, I’d be looking more serious at a Nanni engine, still based on a Kubota block but marinised in France. Spares would surely be easier to obtain. As Grendel said, why 85hp? I would think that for rivers and canals, 50hp would be ample, but Vaughan is far more familiar with the French waterways and their requirements, so will be able to advise better than I. 1 Quote Link to comment Share on other sites More sharing options...
annv Posted April 20, 2022 Share Posted April 20, 2022 Hi Beta dont do a 85t they do do a 90t the t stands for Turbo not ideal for river use beta use a Kubota base engine max revs 2800rpm or a John Deer (ford) engines both are agriculture engines with gear driven camshaft these type of engine lasts for ever providing regular oil changes, I preferer beta as there add on's ie alternators are better engineered, parts are available from Beta, Kubota, and John Deer. You dont say what boat and where you will use it, they do Keel cooled and sea water cooled, hence what do you want it for. As with most marine engines for private use use a agriculture based engines with bolt on marinized items. These are userely low rev gear driven agriculture derived ie no rubber belts that need regular changing with catastrophic results if they break that high rev diesel engines for road use are. John Quote Link to comment Share on other sites More sharing options...
NeilB Posted April 20, 2022 Share Posted April 20, 2022 59 minutes ago, annv said: Hi Beta dont do a 85t they do do a 90t Here you go - https://betamarine.co.uk/portfolio/beta-85t/ Looks like a different base engine to the 90T. Quote Link to comment Share on other sites More sharing options...
annv Posted April 20, 2022 Share Posted April 20, 2022 Hi Neal the 85t is sea going range. John Quote Link to comment Share on other sites More sharing options...
Vaughan Posted April 20, 2022 Share Posted April 20, 2022 As others have said, it depends on what sort of boat you have. If it is a Dutch barge, maybe this engine is suitable! Quote Link to comment Share on other sites More sharing options...
NeilB Posted April 20, 2022 Share Posted April 20, 2022 1 hour ago, annv said: Hi Neal the 85t is sea going range. John That's just some marketing rubbish to differentiate between the keel cooled and heat exchanger cooled versions. Quote Link to comment Share on other sites More sharing options...
CapitainFrenchy Posted April 20, 2022 Author Share Posted April 20, 2022 Hello everyone. Thank you for your answers. I prefer to take an 85T because I will add one, see two additional alternators, to serve as a 240V A/C generator and another for future battery charging. ;) reason why I need to be sure of the hourly consumption of fuel in load, the fuel becomes luxurious. Quote Link to comment Share on other sites More sharing options...
annv Posted April 21, 2022 Share Posted April 21, 2022 Hi I do think Beta's add on's are better engineered than Nanni, as regards fuel consumption the graphs are factory test results and can only give a rough idea to actual consumption they can however give a good comparison between different engines/makes. You will only need the extra power to run 240v if cruising at the same time as generating, if however you will only generate while moored you wont need the extra power and with a smaller engine use less fuel. John Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.