SweetKingfisher1 Posted January 7, 2017 Share Posted January 7, 2017 At the boat show today we were looking at Marine Teak table tops for a small, but nice table top. What I want to do is to save putting another base onto the floor. I want if possible to use the pedestal from the table we already have on the boat. I am guessing and trying to remember our pedestals are wider than the one's on the market today (I may be wrong), but how or where would I get a under table mount pedestal plus would fit our pedestal (which are a good 20 years old). Has anyone, please got any ideas where I / we could get an under table mount? Any help of advise would be very grateful. Many thanks. Regards Marina Quote Link to comment Share on other sites More sharing options...
JennyMorgan Posted January 7, 2017 Share Posted January 7, 2017 Luke, the boss of this company, https://www.marineteak.co.uk/ is a decent bloke, lives on Oulton Broad, is a NBN face-book member, worth phoning and asking. Alternatively have a word with those nice folk at the boat-building training centre, also at Oulton Broad, they are not adverse to such jobs and generally at very fair prices http://www.ibtc.co.uk/ Alternatively a bit or decking or old pallets and call it shabby-chic. 2 Quote Link to comment Share on other sites More sharing options...
Baitrunner Posted January 7, 2017 Share Posted January 7, 2017 I doubt Luke will be able to help if it's a discontinued size. exactly what diameter fitting do you have? You may be surprised in it may still be currently available. Mine is 13 yrs old and still seems to be standard size. Norfolk marine had a good selection last time I needed one. Quote Link to comment Share on other sites More sharing options...
SweetKingfisher1 Posted January 7, 2017 Author Share Posted January 7, 2017 As for the size I don't know until we go back up (which is the end of Feb), but they are wider than we were looking at today. Do pedestals come in different sizes? Regards Marina Quote Link to comment Share on other sites More sharing options...
Baitrunner Posted January 7, 2017 Share Posted January 7, 2017 They do come in different heights. As in pole lengths. To be honest, I thought they were all the same. I am sure a more techy person will know in more detail. Failing that can you reuse your existing pedestal and fit to new table? or I can lend you my dremel to remove the old base!!!! Quote Link to comment Share on other sites More sharing options...
JennyMorgan Posted January 7, 2017 Share Posted January 7, 2017 I was rather hoping that Luke would know a man with a saw and a plane, he's a pretty helpful sort of bloke. Quote Link to comment Share on other sites More sharing options...
Baitrunner Posted January 7, 2017 Share Posted January 7, 2017 Certainly if he can help he will. I know he is basically out of contact during the boat show but happy to ask him Saturday if you have the sizes? or once the show is finished ping him an email. You can get the best email address from his marine teak web site. Quote Link to comment Share on other sites More sharing options...
tjg1677 Posted January 8, 2017 Share Posted January 8, 2017 If i have grasped this right, but i may be wrong and if so apologise in advance, i think you refer to what is called a desmo fitting. Try in google " desmo table leg" the results will be self explanatory and you will see a lot of options. Hope this may help Trev 1 Quote Link to comment Share on other sites More sharing options...
Vaughan Posted January 8, 2017 Share Posted January 8, 2017 I would try Peachments in Brundall. I think you will find they were supplying them to Alphacraft in the first place. Quote Link to comment Share on other sites More sharing options...
ZimbiIV Posted January 8, 2017 Share Posted January 8, 2017 Hi Marina, Sit down before you look at prices, I normally look at caravan suppliers before chandlery suppliers here is one http://www.magnummotorhomes.co.uk/en/Tables-Legs/Table-Legs another one I look at is http://www.rainbow-conversions.co.uk/bases-legs.html paul 1 Quote Link to comment Share on other sites More sharing options...
RayandCarole Posted January 8, 2017 Share Posted January 8, 2017 Lying in my garage off our Freeman looks like it fits 2 1/4 inch pole, lightweight aluminium needs a bit of a clean up. Free if its any use to you (small donation to forum) pick it up next time your in Norfolk Ray & Carole Quote Link to comment Share on other sites More sharing options...
JawsOrca Posted January 8, 2017 Share Posted January 8, 2017 Ma, what do you want to know? I'm confused? Most old poles (as pictured above) are the same size. You can buy these anywhere and they are pennies obviously brianwards do or a caravan shop would be cheap. I think we have spares in the garage if you want new bases or poles.. (Sorry dying of manflue so barely know where I am today). Marineteak do a cool simple base which you can unscrew and leaves a minimal bottom base.. we are looking at getting one for our forward cabin table but £80 is a bit steep (but I think worth it). Quote Link to comment Share on other sites More sharing options...
ZimbiIV Posted January 8, 2017 Share Posted January 8, 2017 Marina, If you can remember what our cockpit table on Zimbi is like, that was an outside table from Ikea that I took the legs of and varnished then got the leg fixings from Magnum motorhomes. The whole lot only cost about £75 of course I didn't charge myself for fitting it ( couldn't afford the hourly rates!) Photo shows how messy we can get a table. paul 1 Quote Link to comment Share on other sites More sharing options...
JennyMorgan Posted January 8, 2017 Share Posted January 8, 2017 I'm not remotely interested in fitting a pedestal nor a table but nevertheless having read one or two postings I've now read the lot and what a pleasing read it's been. Friendly & helpful, what more can we ask of our forum? 1 Quote Link to comment Share on other sites More sharing options...
quo vadis Posted January 8, 2017 Share Posted January 8, 2017 Jiffy made his own table top and the pictures do not do his hard work justice Quote Link to comment Share on other sites More sharing options...
Wildfuzz Posted January 9, 2017 Share Posted January 9, 2017 Find a man with a woodlathe Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.