oceandawn Posted October 21, 2015 Share Posted October 21, 2015 HiThinking about having our boat relined in the main cabin. We understand that it is quite a big job. Has anyone had any experience of someone who would be able to do it and the rough cost? It is a 30 ft Ocean. Many Thanks Pauline Quote Link to comment Share on other sites More sharing options...
Oddfellow Posted October 21, 2015 Share Posted October 21, 2015 Kingfisher Boat Services can do this kind of work. However, costs vary greatly depending on what you want to line the cabin with. Carpet is generally the cheapest option. You can use vinyl or hard linings, sometimes finished with a hard-wearing formica laminate. It is a big job and the costs cannot be estimated without seeing what needs to be removed to get at the existing linings and to ensure that the new linings fit properly with edges hidden beneath ceiling panels, furniture and so on. We did an extensive refit of a Princess 33 earlier this year including brand new ceiling panels, lighting, the lot. The original boat had suspended ceiling vinyls that were aging. Rather than redoing in the same vein, the new linings are on boards so that you can drop them down to get to fixings above (say to reseal a handrail fixing that's leaking) - something that can't be done with suspended cloth. The new panels have no visible fixings at all, leaving exceptionally clean lines. I've attached a few pictures. Quote Link to comment Share on other sites More sharing options...
oceandawn Posted October 21, 2015 Author Share Posted October 21, 2015 That looks a nice job. Can I ask the rough cost? Pauline Quote Link to comment Share on other sites More sharing options...
JawsOrca Posted October 21, 2015 Share Posted October 21, 2015 Looking good Andy.If you don't go with andy I'll do it for a couple of grand Quote Link to comment Share on other sites More sharing options...
Oddfellow Posted October 21, 2015 Share Posted October 21, 2015 (edited) It's expensive. The ceiling panelling, can be challenging as every panel needs to be properly templated, cut, trimmed, trimmed with vinyl, pre-fitted, jiggled and so on. We did a lot more to the boat than just the linings, but the cost of relining (in carpet) all the cabin sides and every headling was about £3.5k. But that was a high-spec job. The costs can be greatly reduced in many areas but at the cost of the finish. For instance, covering joins in headlings with varnished strips avoids a lot of jiggling which is man-hours. There are LOTS of options for bulkhead coverings too. If we get the opportunity, we hope to repanel some fleet boats in a very contemporary fashion this winter. Away for a few days now, but drop me a line in November and we can talk. Edited October 21, 2015 by FreedomBoatingHols Quote Link to comment Share on other sites More sharing options...
oceandawn Posted October 21, 2015 Author Share Posted October 21, 2015 Thanks for that. Where are you based North or South? We are in Richardsons wetshed Quote Link to comment Share on other sites More sharing options...
Oddfellow Posted October 21, 2015 Share Posted October 21, 2015 We are in Thorpe, Norwich - South! Quote Link to comment Share on other sites More sharing options...
C.Ricko Posted October 21, 2015 Share Posted October 21, 2015 Get Phil at moonfleet to quote, we will do it on site or round the corner. not always the cheapest but it will be done right (not suggesting otherwise of others) Quote Link to comment Share on other sites More sharing options...
JanetAnne Posted October 21, 2015 Share Posted October 21, 2015 Or go for something a bit more traditional.....?HeadliningsBulkheadsAnd hull liningsThen again perhaps I am slightly bias 6 Quote Link to comment Share on other sites More sharing options...
TheQ Posted October 22, 2015 Share Posted October 22, 2015 Or go for something a bit more traditional.....?HeadliningsBulkheadsAnd hull liningsThen again perhaps I am slightly bias To which angle are you bias? Quote Link to comment Share on other sites More sharing options...
JanetAnne Posted October 22, 2015 Share Posted October 22, 2015 To which angle are you bias?Lets just say l can have a rather blinkered approach to old wooden boats... Having said that, on an icy winters morning when your body heat has condensed all night and frozen to the ceiling, at the point it starts to defrost and drip on you those nice soft dry headlinings start to look really cozy!! 1 Quote Link to comment Share on other sites More sharing options...
TheQ Posted October 22, 2015 Share Posted October 22, 2015 Lets just say l can have a rather blinkered approach to old wooden boats... Having said that, on an icy winters morning when your body heat has condensed all night and frozen to the ceiling, at the point it starts to defrost and drip on you those nice soft dry headlinings start to look really cozy!!That I remember, sleeping in a Lysander 17, my arm would come out of the sleeping bag reach across, to the cooker, turn the gas on, light up and retreat until.A, The kettle was boiling,B, The frost line had melted down the windows... Quote Link to comment Share on other sites More sharing options...
oceandawn Posted October 22, 2015 Author Share Posted October 22, 2015 Hi Janet AnneHow do you get that fabulous finish on the woodwork? Beautiful! Quote Link to comment Share on other sites More sharing options...
MBA Marine Posted October 22, 2015 Share Posted October 22, 2015 Hi Janet AnneHow do you get that fabulous finish on the woodwork? Beautiful!Layers, you varinsh without trying to apply 1/8" thinkness at a time, flat it back when hard and repeat over and over until you have a beautiful smooth mirror finish as pictured. it cannot be rushed, if you do you will **** it up. Quote Link to comment Share on other sites More sharing options...
oceandawn Posted October 22, 2015 Author Share Posted October 22, 2015 Hi CliveWe have spoken to Phil but we understood that Moonfleet didn't do linings and he had to subcontract. Maybe we misunderstood.However. we are seeing him next week to look at some other work. The work that he as done for us in the past has been 1st class. Thoroughly reliable and a pleasure to do business with.A really good guy to entrust your boat to. Quote Link to comment Share on other sites More sharing options...
LondonRascal Posted October 22, 2015 Share Posted October 22, 2015 Very good job on the Princess there Andy, I have been following progress on the Kingfisher Facebook page of this boat. (note your link from the Kingfisher Website does not work to your Facebook page). I really like the 33 and think generally they have aged well, but I can't help posting a photo of one for sale which is my favorite and must have cost a fortune to completely re-fit. Quote Link to comment Share on other sites More sharing options...
Oddfellow Posted November 4, 2015 Share Posted November 4, 2015 Thanks for that Robin. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.