BrundallNavy Posted August 31, 2014 Author Share Posted August 31, 2014 Not much to report this week as we decided to have a bit of time out sailing on PL9, had some sun, rain and strong winds but it was so nice to be back on the water. Managed to get a bit more done on the Broom, spent the day steaming ribs for the forward cabin, steamed seven and managed to get four fitted, the others broke do to knots in the timber, just need one more to finish it off. I have decided to replace all the lower planks except the garboard as a mixture of rot and holes left by doubler pads have made it a bit of a mess. Doug. 1 Quote Link to comment Share on other sites More sharing options...
riyadhcrew Posted August 31, 2014 Share Posted August 31, 2014 Doug, As a matter of interest, how long do you steam a 4 X 2 rib for before you can shape it? Quote Link to comment Share on other sites More sharing options...
BrundallNavy Posted August 31, 2014 Author Share Posted August 31, 2014 It depends on the size of the wood, the first three were done for around an hour but two of these broke as the further forward you get the sharper the bend, the last four were soaked in the river over night and then steamed for about two hours these bent easier but one broke due to a knot and me pushing to hard. It's a bit of guess work but the wood needs to be almost too hot to pick up. By the way you should wear gloves when using oak or you will end up with black hands due to the tanning that seeps out. Doug. 1 Quote Link to comment Share on other sites More sharing options...
Guest Posted September 1, 2014 Share Posted September 1, 2014 I find these restoration threads fascinating, so look forward to following this one. Perhaps one of the mods could correct the spelling in the thread title? Quote Link to comment Share on other sites More sharing options...
BrundallNavy Posted September 7, 2014 Author Share Posted September 7, 2014 Just a small update this week. Managed to fit part of the chine rail on the port side, I need to fit the chine plank at the forward end before I can fit the forward part of the chine rail as there is nothing at the moment to fix it to. The floor will have to be chocked back up into position to get the line back. Doug. 4 Quote Link to comment Share on other sites More sharing options...
Polly Posted September 8, 2014 Share Posted September 8, 2014 Awesome Doug! Keep the posts coming. just catching up here, nice to see Hele too. Quote Link to comment Share on other sites More sharing options...
Springsong Posted October 13, 2014 Share Posted October 13, 2014 Looking good Doug. I shall have to pop in and see you when things are a little less frantic. Quote Link to comment Share on other sites More sharing options...
BrundallNavy Posted October 26, 2014 Author Share Posted October 26, 2014 Well, progress has been a bit slow lately. With attending the forum meeting and doing some diy I have not been down to the boat for 3 weeks. I have however been busy with the plastic, the new water tanks have arrived and I am very pleased with them so much so I have decided to change the fuel tank as well. The water and fuel tank will also be fitted with a level indicator as the extra cost was minimal. I have also bought a calorifier, 65 litres which is slightly bigger the the old one but fitted the space better than the 55 litre one, also bought a new water pump so all the water system will be replaced ( SWMBO instructions). Also two new bildge pumps, one for forward and one aft. I have been busy today steaming a new plank for the port chine area, as its 200mm by 30mm it was to stiff to bend round on its own. I have clamped it to the plank above until it cools and then it will be cut to shape. Once this is in place I can then fit the chine rail on the inside. Doug 3 Quote Link to comment Share on other sites More sharing options...
JawsOrca Posted October 26, 2014 Share Posted October 26, 2014 Hi Doug.. looks like an expensive five moments! Keep the updates coming... I love watching others doing timber work (One day we will get one!)... Quote Link to comment Share on other sites More sharing options...
Baitrunner Posted October 26, 2014 Share Posted October 26, 2014 Doug, You must love hard work? I restored an old wooden mirror dinghy many years ago and that was hard work. As per everyone else looking forward to seeing the finished project as she should look beautiful. Good luck. Quote Link to comment Share on other sites More sharing options...
Timbo Posted October 26, 2014 Share Posted October 26, 2014 What's with all this slacking? Three weeks off? I can see nothing get's done if I'm not down there supervising...oh hang on I think that's the other way around ...yup, nothing get's done if I am down there supervising! 2 Quote Link to comment Share on other sites More sharing options...
SPEEDTRIPLE Posted October 26, 2014 Share Posted October 26, 2014 Hi Doug, Is it possible to have an imersion heater fitted to thr new calorifier, as it could be handy when moored for any long periods at moorings with leccy posts. I have to admit to being a convert to the convenience of a decent 240v hook up system after our week on Lightning last week. We could have piping hot water all day without having to run the engine. Quote Link to comment Share on other sites More sharing options...
Baitrunner Posted October 26, 2014 Share Posted October 26, 2014 Speed triple. Yes you can. I have one and if you have a shower on board the immersion does mean you can shower on your own boat when you want. I know some public or marina showers can leave a lot to be desired. I am also lucky enough to have a genny. So untold lectricary and hot water even in the wildest parts. 1 Quote Link to comment Share on other sites More sharing options...
BrundallNavy Posted October 30, 2014 Author Share Posted October 30, 2014 Neil, Yes mine came with one fitted as standard, you can also get one with a twin coil so can be heated from the engine and an auxiliary heater eg webasto etc. Doug. 1 Quote Link to comment Share on other sites More sharing options...
Agusta Posted November 18, 2014 Share Posted November 18, 2014 Hi Doug, Its wonderful to here about your trials and tribulations with regards your Captain. Recently bought a Captain myself to find quite a lot of rot that wasn't picked up in the survey but she's on the mend now, slowly but surely. Like you my wife is in Oxford so I also have the long journey to the broads most weekends. Love to hear more about your Captain. Regards Agusta Quote Link to comment Share on other sites More sharing options...
BrundallNavy Posted November 18, 2014 Author Share Posted November 18, 2014 Hi Agusta, It's not Captain 12 is it ? She was on our yard for a while and is a very nice boat, where is the rot in yours. The chine rail seems to be a weak spot. Doug. Quote Link to comment Share on other sites More sharing options...
Agusta Posted November 18, 2014 Share Posted November 18, 2014 Hi Doug, Down the port side above the water line. Chine rail seems to be ok thank god How is your Captain progressing these days? Regards Agusta Quote Link to comment Share on other sites More sharing options...
Timbo Posted November 18, 2014 Share Posted November 18, 2014 Hang on Agusta...are we talking about Captain XII here? THE Captain XII? This Captain XII with me on it? 2 Quote Link to comment Share on other sites More sharing options...
BroadScot Posted November 19, 2014 Share Posted November 19, 2014 Hang on Agusta...are we talking about Captain XII here? THE Captain XII? This Captain XII with me on it? Wow Tim, were you that young, once Iain. Quote Link to comment Share on other sites More sharing options...
Timbo Posted November 19, 2014 Share Posted November 19, 2014 I'm still the curious, adventurous fun loving young boy I always was Iain...it's just that I fell asleep one night and awoke to find some evil octogenarian had traded bodies with me. Just keep your eye out for a six year old kid that has an attitude far older than his years and a taste for prune juice and music hall! 2 Quote Link to comment Share on other sites More sharing options...
BroadScot Posted November 19, 2014 Share Posted November 19, 2014 Hi Tim, Dunno about the prune juice, but you could have a twin 6 year old brother, who loves Music Hall, well all proper live music anyway, me! Iain. Quote Link to comment Share on other sites More sharing options...
Agusta Posted November 19, 2014 Share Posted November 19, 2014 Hi there, It certainly is the original "Captain x11" but neither do I do prune juice of frequent music halls but would dearly love to know a little bit more history and your enjoyment of her. Regards Agusta 1 Quote Link to comment Share on other sites More sharing options...
Timbo Posted November 19, 2014 Share Posted November 19, 2014 I can tell you that we hired her throughout our holidays in the 1970's. In 1972 Uncle Albert hired her the week after he left the RN. He'd spent the year before he left piloting assault craft & MTB's. On handover at the start of the first holiday aboard Captain XII we were left sat for hours waiting for her due to engine problems. These were solved when Uncle Albert walked down to the boat and took over the spanners (qualified marine engineer). Second week of holiday Uncle Albert used her to help fish a lad out of the water at Potter Bridge after his Dad attempted to take their hire boat under without a pilot. Uncle Albert spent the rest of the afternoon with the pilot...I'm assuming in the pub. That same week Uncle Albert came a cropper and fell in at Potter opposite the pub, but was in and out so fast his cigs never got wet although he did not appreciate the round of applause from the punters in the beer garden or my brother saying "that was funny do it again". It was aboard Captain XII that I fell in love with the Broads, boating, history and archaeology. On board Captain XII I had my first TV dinner (Roast Beef), caught my first fish, had my first glass of wine (got plastered and walked into the throttle) and sneaked my first cigarette at the age of 11. If Uncle Albert sees her he gets all teary eyed & drags out the old hanky. 1 Quote Link to comment Share on other sites More sharing options...
Agusta Posted November 19, 2014 Share Posted November 19, 2014 What magical stories, thankyou and I can't wait to here a few more. Hopefully I'll do her justice on the renovation. Keep in touch Agusta Quote Link to comment Share on other sites More sharing options...
SPEEDTRIPLE Posted November 19, 2014 Share Posted November 19, 2014 Speed triple. Yes you can. I have one and if you have a shower on board the immersion does mean you can shower on your own boat when you want. I know some public or marina showers can leave a lot to be desired. I am also lucky enough to have a genny. So untold lectricary and hot water even in the wildest parts. I know exactly what you mean re marina showers. We have berth holders showers at Brooms, which seem pretty good, whereas we used the toilets / showers at W R C last month, and to be honest, they`re long overdue for a re-furb. The one i used had mould covering the ceiling, with several of the fittings being broken or in poor condition. Add to that the layout of the cubicals is (in my opinion) all wrong, so i tend to agree with your comments. I did actually sit down and plan out a toilet / shower cubical when i got back to the boat, but i doubt whether they would have any interrest in any idea i hve re a better layout. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.