BroadAmbition Posted May 24, 2020 Share Posted May 24, 2020 Close, it's actually BA R641 Not so much loosing it overboard as I reckon due to the lead weight in the bottom rung it would sink. You have highlighted a fair point there, I've never checked to see if the whole lot would sink or float - I'll have to try it in some clear shallow water now. I put the Morse lettering in the end of the rungs as an anti theft thing as I did with our deck mop after the first one got stolen and replaced with a knackered one Griff Quote Link to comment Share on other sites More sharing options...
MauriceMynah Posted May 24, 2020 Share Posted May 24, 2020 Somebody mentioned motorcycle folding foot rests earlier in this thread. That had me thinking. A length of box section metal, bolted to the stern, vertically from gunwale to about 2' below water level, but hinged at just above water level allowing for 180 degree movement at a port/starboard orientation. Folding foot rests acting as rungs folding at a bow stern orientation mounted on the box section at regular intervals. Does any of that make sense? If I'm babbling rubbish, blame the rum, if I'm making sense and am proving myself to be a genius, blame the rum anyway. 3 1 Quote Link to comment Share on other sites More sharing options...
Islander Posted May 24, 2020 Share Posted May 24, 2020 The best dive ladders are made that way MM. Having done a bit of diving in the past, that form of ladder is the easiest to climb in full scuba kit. You can climb out even with your fins on( not flippers, that a dolphin on tv). Now I know not many people are going to fall in wearing full scuba on the broads but soaking wet clothes are blooming heavy when you get past shoulder level climbing out. If you have never had to climb back onto a boat soaking wet you will not believe how difficult it can be. It's worth asking at your local swimming pool (when they open again) if they will let you try. They usually have lifesaving classes or even a local scuba club night. We use to have training nights once a week at B'Stortford and additional bodies were welcome so as to practice rescue techniques. Colin N.B. Please remember this is a very serious situation and once you start laughing you'll never get them out 1 Quote Link to comment Share on other sites More sharing options...
OldBerkshireBoy Posted May 24, 2020 Share Posted May 24, 2020 I know that it will need modifications such as mounting brackets however what about a telescopic ladder with added weigths in the bottom 2 rungs and a quick release knotted rope up top? Quote Link to comment Share on other sites More sharing options...
floydraser Posted May 24, 2020 Author Share Posted May 24, 2020 3 hours ago, MauriceMynah said: Somebody mentioned motorcycle folding foot rests earlier in this thread. That had me thinking. A length of box section metal, bolted to the stern, vertically from gunwale to about 2' below water level, but hinged at just above water level allowing for 180 degree movement at a port/starboard orientation. Folding foot rests acting as rungs folding at a bow stern orientation mounted on the box section at regular intervals. Does any of that make sense? If I'm babbling rubbish, blame the rum, if I'm making sense and am proving myself to be a genius, blame the rum anyway. No, you are a genius. I had a similar thought: how about the box section being free with either of these alternating as steps either side - https://www.ebay.co.uk/itm/1-Pair-Steel-Mountain-Bike-Foot-Pedal-Bicycle-Rear-Folding-Pedals-Accessories-SA/202316352176?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160727114228%26meid%3Dfc17950955d64410ad8a3bbccafa5bb6%26pid%3D100290%26rk%3D2%26rkt%3D4%26sd%3D133409604489%26itm%3D202316352176%26pmt%3D1%26noa%3D1%26pg%3D2060778%26brand%3DUnbranded%2FGeneric&_trksid=p2060778.c100290.m3507 or https://www.ebay.co.uk/itm/2x-Folding-Highway-Motorcycle-Clamp-On-Foot-Pegs-for-Yamaha-Honda-Harley-UK/264700590113?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649 If it could also be light weight with a hook on the end it could be a boat hook too. No rum assistance. Quote Link to comment Share on other sites More sharing options...
floydraser Posted May 24, 2020 Author Share Posted May 24, 2020 7 hours ago, BroadAmbition said: That's a surprise, I can't seem to find a photo of the MOB ladder I made for onboard 'B.A', the photo's below were taken during the making process, can't seem to find one of the finished article. I made these hardwood rungs, the bottom one has a lead insert underneath it. Thick white rope with a knot and s/steel washer under each ruing. Above the top rung the rope is is just looped over a cleat and then chucked overboard, it can be deployed in seconds and lives in a deck locker so is easy to get to. It has been used in anger and works very well Griff Thanks Griff. This is the kind of use I had in mind with the cheapo plastic thing I bought. If tried to copy this, three rungs would probably be acceptable but the rest would look like they had been made by different five year olds. The knots would have different spacing so the rungs all be at different angles too. Tidy garage by the way. Are there more steps to spell "Welcome aboard" reading from the bottom? 1 Quote Link to comment Share on other sites More sharing options...
ExSurveyor Posted May 24, 2020 Share Posted May 24, 2020 2 hours ago, OldBerkshireBoy said: I know that it will need modifications such as mounting brackets however what about a telescopic ladder with added weigths in the bottom 2 rungs and a quick release knotted rope up top? The telescopic surveyors ladders that I use weigh a ton, wouldn't need any extra weight. They are also difficult to collapse from the top rather than the bottom as they use gravity to help. Quote Link to comment Share on other sites More sharing options...
OldBerkshireBoy Posted May 24, 2020 Share Posted May 24, 2020 1 hour ago, floydraser said: No, you are a genius. I had a similar thought: how about the box section being free with either of these alternating as steps either side https://www.ebay.co.uk/itm/2x-Folding-Highway-Motorcycle-Clamp-On-Foot-Pegs-for-Yamaha-Honda-Harley-UK/264700590113?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649 If it could also be light weight with a hook on the end it could be a boat hook too. No rum assistance. Think I would prefer bolted or welded rather than clamped tbh, too easy for a peg to slide the centre pole. Quote Link to comment Share on other sites More sharing options...
OldBerkshireBoy Posted May 24, 2020 Share Posted May 24, 2020 5 minutes ago, psychicsurveyor said: The telescopic surveyors ladders that I use weigh a ton, wouldn't need any extra weight. They are also difficult to collapse from the top rather than the bottom as they use gravity to help. That look like the pro version with wide rungs for comfort, sure there are cheaper & lighter versions for the diyer. Quote Link to comment Share on other sites More sharing options...
floydraser Posted May 24, 2020 Author Share Posted May 24, 2020 35 minutes ago, OldBerkshireBoy said: Think I would prefer bolted or welded rather than clamped tbh, too easy for a peg to slide the centre pole. I would too. They are nice looking and expensive pegs but there are cheaper but chunkier ones which fit with a bolt, probably heavier though. Quote Link to comment Share on other sites More sharing options...
ExSurveyor Posted May 24, 2020 Share Posted May 24, 2020 1 hour ago, OldBerkshireBoy said: That look like the pro version with wide rungs for comfort, sure there are cheaper & lighter versions for the diyer. Still very difficult to collaspe. I have a light weight one but it is a nightmare to use as it binds. Add a bit of mud or silt and it would have to become disposable. The old style 4 part slot togeter ones would be better but still have limitations. 1 Quote Link to comment Share on other sites More sharing options...
OldBerkshireBoy Posted May 24, 2020 Share Posted May 24, 2020 38 minutes ago, psychicsurveyor said: Still very difficult to collaspe. I have a light weight one but it is a nightmare to use as it binds. Add a bit of mud or silt and it would have to become disposable. The old style 4 part slot togeter ones would be better but still have limitations. I had one of those once, bright orange it was and each section was around 4 1/2ft long, but stupidly I gave it away. Quote Link to comment Share on other sites More sharing options...
ExSurveyor Posted May 24, 2020 Share Posted May 24, 2020 19 minutes ago, OldBerkshireBoy said: I had one of those once, bright orange it was and each section was around 4 1/2ft long, but stupidly I gave it away. The new ones are much better for surveying, but useless for a boat ladder. Quote Link to comment Share on other sites More sharing options...
floydraser Posted May 31, 2020 Author Share Posted May 31, 2020 Someone somewhere said they use one of these for a mudweight. I like the idea of a practical solution combined with a bit of history and bought this yesterday. It's not clear but it does say 56lbs and I have tested it with a spring balance of similar vintage. I guess it'll bring a nice sample of mud up in the dished top! And I promise to paint it... 2 Quote Link to comment Share on other sites More sharing options...
grendel Posted May 31, 2020 Share Posted May 31, 2020 These work fine for Marthams 1 Quote Link to comment Share on other sites More sharing options...
BroadAmbition Posted September 28, 2020 Share Posted September 28, 2020 That's a surprise, I can't seem to find a photo of the MOB ladder I made for onboard 'B.A', the photo's below were taken during the making process, can't seem to find one of the finished article. I made these hardwood rungs, the bottom one has a lead insert underneath it. Thick white rope with a knot and s/steel washer under each ruing. Above the top rung the rope is is just looped over a cleat and then chucked overboard, it can be deployed in seconds and lives in a deck locker so is easy to get to. It has been used in anger and works very well Griff Herewith photo's taken earlier today Griff 2 1 Quote Link to comment Share on other sites More sharing options...
floydraser Posted September 29, 2020 Author Share Posted September 29, 2020 Exellent job Griff. I still marvel at how you get the knots in just the right place. I think that would be a good one for The Generation Game! Here's my effort. It's made of several bits of 6mm MDF glued together. It'll work fine as long as the MOB can tread water while I finish the job. Quote Link to comment Share on other sites More sharing options...
Regulo Posted September 30, 2020 Share Posted September 30, 2020 Isn't MDF going to explode in water? Or at least get soggy? Quote Link to comment Share on other sites More sharing options...
floydraser Posted September 30, 2020 Author Share Posted September 30, 2020 1 hour ago, Regulo said: Isn't MDF going to explode in water? Or at least get soggy? Yep. Sorry Regulo, my silly sense of humour. It's a template; the left hand edge describes the profile of the side of the boat. Back on page 4 of this thread there's a pic showing the original wooden steps which should have come with the boat and I am trying to do something similar. As my woodworking skills are sadly light years behind quite a few people on this forum I should keep quiet about it but hey, a bit of humiliation never hurt anyone. The template is made up of bits because I keep adding sections to get the profile as close as possible to the shape of the boat to spread the load. 1 Quote Link to comment Share on other sites More sharing options...
Regulo Posted September 30, 2020 Share Posted September 30, 2020 I never REALLY thought you were that daft, but knowing some people on here, I couldn't be sure! . You know who you are. 1 Quote Link to comment Share on other sites More sharing options...
MauriceMynah Posted September 30, 2020 Share Posted September 30, 2020 I rarely have the faintest idea who I am ! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.