Royston Posted March 15, 2023 Share Posted March 15, 2023 Hi although I have hired many times on the broads the one thing I’ve never done is mudweighted , as I will be visiting in July and September and the moorings particularly in the north may be busy I would be glad of any advice on the matter , I have not come across any info anywhere where and where not to obvs , , it’s just something I would like to try maybe hireing a dingy to access dry land to walk my chihuahua , Thanks in advance 1 Quote Link to comment Share on other sites More sharing options...
CeePee1952 Posted March 15, 2023 Share Posted March 15, 2023 11 minutes ago, Royston said: Hi although I have hired many times on the broads the one thing I’ve never done is mudweighted , as I will be visiting in July and September and the moorings particularly in the north may be busy I would be glad of any advice on the matter , I have not come across any info anywhere where and where not to obvs , , it’s just something I would like to try maybe hireing a dingy to access dry land to walk my chihuahua , Thanks in advance Hi. We're thinking of doing the same thing when we are on the northern broads from 22nd April. Like you we have never mudweighted and are going to give it a go. I asked the question myself on here not so long back but for the life of me can't find the post (think it's an age thing lol). We are going to try and mudweight at Ranworth and/or Barton Broad providing the weather conditions are favourable. I'm sure others will be able to give advice better than me so I'll let them advise you Chris Quote Link to comment Share on other sites More sharing options...
Royston Posted March 15, 2023 Author Share Posted March 15, 2023 Thanks Chris yeah I too suffer from the age thing lol , I have had problems getting moored in the past at Ranworth ( always popular ) and Womack staithe which is a favourite spot of mine , In the past with the kids it was always more beneficial to moor nearer to main popular centres whereas now they ain’t comeing it’s not needed so I would like to give it a go and with a rowing dingy could add another dimension to things and make it easier to find overnight stops , but I e just never come across any specific info , I would be very interested in how you get on in April though Thanks 1 Quote Link to comment Share on other sites More sharing options...
RumPunch Posted March 15, 2023 Share Posted March 15, 2023 Frequently mudweight on Barton. It's deep enough over most of the Broad - just please avoid doing so in the channel as some do - there is still passing traffic even after dusk 3 Quote Link to comment Share on other sites More sharing options...
Regulo Posted March 15, 2023 Share Posted March 15, 2023 Best thing to do. Peace and quiet, no noisy neighbours - perfect. Let out plenty of slack, then you stand less chance of dragging the weight. If you don't have an electric winch, and the weight is stuck, take up as much slack as you can, fasten off, and go slow astern to break the suction. Then haul in. I've mudweighted on practically every broad. 2 1 Quote Link to comment Share on other sites More sharing options...
Royston Posted March 15, 2023 Author Share Posted March 15, 2023 4 minutes ago, Regulo said: Best thing to do. Peace and quiet, no noisy neighbours - perfect. Let out plenty of slack, then you stand less chance of dragging the weight. If you don't have an electric winch, and the weight is stuck, take up as much slack as you can, fasten off, and go slow astern to break the suction. Then haul in. I've mudweighted on practically every broad. Great thanks , That’s also part of my thinking too mate , I think like a lot of things it comes down to common sense it’s just that I have not come across any guidelines in regards to where and distance from Bankside’s and such , don’t want to fall foul of any bylaws lol Quote Link to comment Share on other sites More sharing options...
Splasher Posted March 15, 2023 Share Posted March 15, 2023 Mud weighting is one solution to avoiding crowded moorings and mooring fees but hiring a dinghy is becoming more difficult with many yards, including Richardsons, getting rid of their dinghy fleet and smaller yards providing dinghies only to their own customers. 1 Quote Link to comment Share on other sites More sharing options...
Royston Posted March 15, 2023 Author Share Posted March 15, 2023 37 minutes ago, Splasher said: Mud weighting is one solution to avoiding crowded moorings and mooring fees but hiring a dinghy is becoming more difficult with many yards, including Richardsons, getting rid of their dinghy fleet and smaller yards providing dinghies only to their own customers. Cheers splasher , yeah I was unsure about dingy hire haveing never needed or wanted to previously ( although I’ve done a lot of canoeing and kayaking ) . I have actually in the last hour been on the phone to Brinjs to amend my July booking to include a dingy and they weee most helpful in doing so , I’m really looking forward to haveing the option it gives me , Thanks for reply Quote Link to comment Share on other sites More sharing options...
marshman Posted March 15, 2023 Share Posted March 15, 2023 Perhaps now I should advertise the rowing /sailing dinghy I have sitting in my front garden!! On mudweighting, check which way the wind is blowing and nose slowly towards the side from where its coming i.e. head to wind. I have only been caught out once in 20 years when the wind went round 180 degrees overnight. Usually in summer months the wind dies away anyway and you can have those stunning evenings the Broads are famous for. Don't lower the mudweight slowly, just let it go making sure your foot is not in a loop and the weight will take itself into the mud. 2 1 Quote Link to comment Share on other sites More sharing options...
Smoggy Posted March 15, 2023 Share Posted March 15, 2023 Main thing before chucking mudweight over is MAKE SURE THERE IS A ROPE ATTACHED, sounds daft but seen it done, and attach the other end as well in case it follows it in, seen that done as well. Didn't laugh though, honest! (lie) 1 1 Quote Link to comment Share on other sites More sharing options...
jeffbroadslover Posted March 15, 2023 Share Posted March 15, 2023 My comment is don't think of mudweighting anywhere on the rivers. Always mudweight in a broad where you can find somewhere with a nice view and not be in the way of anyone else. Can also be in a good spot for fishing if you indulge. Jeff 2 Quote Link to comment Share on other sites More sharing options...
Royston Posted March 15, 2023 Author Share Posted March 15, 2023 51 minutes ago, marshman said: Perhaps now I should advertise the rowing /sailing dinghy I have sitting in my front garden!! On mudweighting, check which way the wind is blowing and nose slowly towards the side from where its coming i.e. head to wind. I have only been caught out once in 20 years when the wind went round 180 degrees overnight. Usually in summer months the wind dies away anyway and you can have those stunning evenings the Broads are famous for. Don't lower the mudweight slowly, just let it go making sure your foot is not in a loop and the weight will take itself into the mud. Many thanks for an excellent description Quote Link to comment Share on other sites More sharing options...
Royston Posted March 15, 2023 Author Share Posted March 15, 2023 32 minutes ago, Smoggy said: Main thing before chucking mudweight over is MAKE SURE THERE IS A ROPE ATTACHED, sounds daft but seen it done, and attach the other end as well in case it follows it in, seen that done as well. Didn't laugh though, honest! (lie) Yip I can believe it lol Quote Link to comment Share on other sites More sharing options...
CeePee1952 Posted March 15, 2023 Share Posted March 15, 2023 Also when lifting the mudweight, before placing it back in it's place on the bow, make sure you've cleaned it off! I erm thought I'd cleaned it off last year when at Beccles yacht marina. On placing it back on the bow I got splattered good and proper cos I hadn't checked the bottom of the mudweight - doh!! Shan't forget again Chris Quote Link to comment Share on other sites More sharing options...
Smoggy Posted March 15, 2023 Share Posted March 15, 2023 A good cleaning trick is to leave it hanging on enough rope to jut be in the water and run for a while, you will get a few folk point and shout your mudweight is down but that is part of the fun. 2 1 Quote Link to comment Share on other sites More sharing options...
annv Posted March 15, 2023 Share Posted March 15, 2023 Hi When mud weighting dont drop the weight straight down as you will get splashed but swing/throw it away from the boat, when choosing a spot allow for the boat to swing 360 degrees without hitting the bank or another boat ,finally allow enough slack in the rope for a rise in tide if not weighting at high tide, other wise you may wake up in a different spot as the weight is pulled up by rising tide, when retrieving the weight if stuck in the mud tighten rope of on the cleat then gently drive boat forwards/rearwards to break suction when free pull weight up, if covered in mud leave it hanging just below water line then drive of retrieving it when it has been washed clean by movement through the water. John 1 Quote Link to comment Share on other sites More sharing options...
Royston Posted March 15, 2023 Author Share Posted March 15, 2023 1 hour ago, CeePee1952 said: Also when lifting the mudweight, before placing it back in it's place on the bow, make sure you've cleaned it off! I erm thought I'd cleaned it off last year when at Beccles yacht marina. On placing it back on the bow I got splattered good and proper cos I hadn't checked the bottom of the mudweight - doh!! Shan't forget again Chris I’ll bare that in mind lol Quote Link to comment Share on other sites More sharing options...
Royston Posted March 15, 2023 Author Share Posted March 15, 2023 51 minutes ago, annv said: Hi When mud weighting dont drop the weight straight down as you will get splashed but swing/throw it away from the boat, when choosing a spot allow for the boat to swing 360 degrees without hitting the bank or another boat ,finally allow enough slack in the rope for a rise in tide if not weighting at high tide, other wise you may wake up in a different spot as the weight is pulled up by rising tide, when retrieving the weight if stuck in the mud tighten rope of on the cleat then gently drive boat forwards/rearwards to break suction when free pull weight up, if covered in mud leave it hanging just below water line then drive of retrieving it when it has been washed clean by movement through the water. John More good advice , many thanks John Quote Link to comment Share on other sites More sharing options...
Maxwellian Posted March 15, 2023 Share Posted March 15, 2023 Make sure when you swing/throw the mud weight out that you do not have the rope round you leg. 3 Quote Link to comment Share on other sites More sharing options...
CeePee1952 Posted March 15, 2023 Share Posted March 15, 2023 2 hours ago, marshman said: Perhaps now I should advertise the rowing /sailing dinghy I have sitting in my front garden!! On mudweighting, check which way the wind is blowing and nose slowly towards the side from where its coming i.e. head to wind. I have only been caught out once in 20 years when the wind went round 180 degrees overnight. Usually in summer months the wind dies away anyway and you can have those stunning evenings the Broads are famous for. Don't lower the mudweight slowly, just let it go making sure your foot is not in a loop and the weight will take itself into the mud. Just had a thought (very rare nowadays!). We're out on Royale Light 2 in September this year and it has an electrically operated mudweight. How does that stick sufficiently in the mud if it is being lowered at a constant speed or does it just "freefall" when operated and then winched back up electrically on retrieval? Chris Quote Link to comment Share on other sites More sharing options...
MauriceMynah Posted March 15, 2023 Share Posted March 15, 2023 I'll let all those who say "don't lower it, drop it or throw it." answer that one. 2 Quote Link to comment Share on other sites More sharing options...
Gracie Posted March 15, 2023 Share Posted March 15, 2023 Let go of the rope if you swing the weight x 2 Quote Link to comment Share on other sites More sharing options...
Wussername Posted March 15, 2023 Share Posted March 15, 2023 How do you throw a mud weight. Do you tuck the weight under your chin, Geoff Capes style, pirouette on the bow of your boat, and then with a mighty heave launch the weight into the bobbing up and down stuff?. 5 Quote Link to comment Share on other sites More sharing options...
CeePee1952 Posted March 15, 2023 Share Posted March 15, 2023 11 minutes ago, Gracie said: Let go of the rope if you swing the weight x Spoilsport Chris 1 Quote Link to comment Share on other sites More sharing options...
Regulo Posted March 15, 2023 Share Posted March 15, 2023 I had an electric winch on my boat. In my experience it made no difference that the weight was lowered rather than dropped. There's a vast quantity of sticky mud on the bottom of most Broads, and after a few moments the weight is well and truly in it! 2 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.