BrundallNavy Posted October 2, 2018 Share Posted October 2, 2018 41 minutes ago, floydraser said: Is this an earlier one? I notice the different hull (the bow shape). This one is shown as built in 1964. The people that own her are very friendly so I’m sure they wouldn’t mind you having a look. Quote Link to comment Share on other sites More sharing options...
Maxwellian Posted October 2, 2018 Share Posted October 2, 2018 Lovely looking craft Quote Link to comment Share on other sites More sharing options...
floydraser Posted October 5, 2018 Author Share Posted October 5, 2018 You may well have heard an almighty sigh of relief sometime on Wednesday afternoon around Brundall Gardens. The trip from Bowling to Clyde Boatyard went as well it could, given we were both (myself and the previous owner) relative novices. I was particularly bothered about the whereabouts of an 11,000 tonne fuel tanker "Songo Emerald" which was also using Rothesay Dock. Luckily it had gone by the time we travelled; I just didn't want to meet it in the river! The lift went really well on Monday, wait for the video. On inspection at Brundall the ship's bell had pulled it's screws out of the woodwork and the fridge had tried to escape it's orrifice. I thought that was the only damage until later when I went to fill the kettle and the water went horribly brown! I guess the lorry driver was in a hurry. This boat handles like a dream and we thoroughly enjoyed our little cruise between the boats in Brundall Bay and then out onto the river. I am no longer a Broads Virgin! That was my first time and although just a tiddly trip, I can already see the appeal of the Broads. We got her into the marina and a very nice chap helped us get her moored up, then it was off to the pub. We walked the mile back to The Yare where I had dined before, then we collected the vehicles. BTW have you seen the "double moon" at the Yare pub? Find it on Google Streetview. Back at BGM we gave her the first of many washes, fitted the cover and all of a sudden it was 5.30. Next trip will be a thorough inspection and high quality photographic session, and the start of a very long to do list. The pic shows her on a temporary mooring; she'll be moved along one place to starboard when the other boat moves. After the trauma of the move it feels like the fun is starting. 3 Quote Link to comment Share on other sites More sharing options...
floydraser Posted October 5, 2018 Author Share Posted October 5, 2018 Ok stand by your beds! Here is the first of around 4 million questions and I'll start you with an easy one: What the Dickens is going on here then? Or when is a davit not a davit? It looks like it's done this way for a definite purpose. 1 Quote Link to comment Share on other sites More sharing options...
Regulo Posted October 5, 2018 Share Posted October 5, 2018 I know! I know! That's a boat owner's bodge up!! They come in all different guises, and I can almost guarantee you'll find some more as you go along. Quote Link to comment Share on other sites More sharing options...
annv Posted October 5, 2018 Share Posted October 5, 2018 Hi Floyd It looks like someone was let loose with a hacksaw, the ends have been left open! you need to wash them out, dry them, then squirt some maintenance spray oil down the inside then seal with frame sealer otherwise they will corrode and or smell, you say brown water came out of the tap looks like you have steel water tanks or badly soiled, they need cleaning and if they have a inspection hatch repaint interior with bitchumen or better still replace with stainless steel tank, enjoy your new experience. John Quote Link to comment Share on other sites More sharing options...
floydraser Posted October 5, 2018 Author Share Posted October 5, 2018 3 hours ago, annv said: Hi Floyd It looks like someone was let loose with a hacksaw, the ends have been left open! you need to wash them out, dry them, then squirt some maintenance spray oil down the inside then seal with frame sealer otherwise they will corrode and or smell, you say brown water came out of the tap looks like you have steel water tanks or badly soiled, they need cleaning and if they have a inspection hatch repaint interior with bitchumen or better still replace with stainless steel tank, enjoy your new experience. John Thanks John, I think I've been thrown by the round bar; it looks like a arrangement for a special bit of kit. But now I can see that removing the davits complete would leave a big gap in the rail and holes in the deck. It's probably close to a good solution but needs finishing properly with end caps to tidy it up. Quote Link to comment Share on other sites More sharing options...
floydraser Posted October 5, 2018 Author Share Posted October 5, 2018 Can anyone suggest an appropriate punishment for the person who did this? Quote Link to comment Share on other sites More sharing options...
Regulo Posted October 5, 2018 Share Posted October 5, 2018 Am I correct in thinking that's been sawn off? Quote Link to comment Share on other sites More sharing options...
floydraser Posted October 5, 2018 Author Share Posted October 5, 2018 1 hour ago, Regulo said: Am I correct in thinking that's been sawn off? Yes it has. Apologies for the poor quality photo, although it's taken on my phone, for some reason it's soft focussing. Quote Link to comment Share on other sites More sharing options...
FairTmiddlin Posted October 5, 2018 Share Posted October 5, 2018 Possibly Hung, Drawn and Quartering. But i'm being a bit soft there I think Quote Link to comment Share on other sites More sharing options...
Regulo Posted October 5, 2018 Share Posted October 5, 2018 Way too lenient, FtM. Quote Link to comment Share on other sites More sharing options...
Guest Posted October 5, 2018 Share Posted October 5, 2018 3 hours ago, floydraser said: Can anyone suggest an appropriate punishment for the person who did this? Can you not put it back together with a bit of no nails? Quote Link to comment Share on other sites More sharing options...
floydraser Posted October 5, 2018 Author Share Posted October 5, 2018 4 minutes ago, Jayfire said: Can you not put it back together with a bit of no nails? I was thinking more along the lines of stretching a bit inner tube accross the gap to save taking it down for bridges? Quote Link to comment Share on other sites More sharing options...
grendel Posted October 5, 2018 Share Posted October 5, 2018 3 hours ago, floydraser said: Can anyone suggest an appropriate punishment for the person who did this? probably needs the end sawing off his mast. Quote Link to comment Share on other sites More sharing options...
annv Posted October 6, 2018 Share Posted October 6, 2018 Hi Floyd It will be easy to repair wonder why they cut it off, is/was it hinged? easier to drop the whole mast for a low bridge i would have thought or is the mast fixed so only needed to cut sufficient to clear bridge. Ref your rear rail, you could cut one of the round bars then hinge it to make rear/stern mooring easier,then fit a wide stepped ladder to access shore, it looks like you will have a few DIY jobs to sort out before next season, anything to keep you out of the pub hopefully and get brownie points from her indoors. enjoy. John Quote Link to comment Share on other sites More sharing options...
Regulo Posted October 6, 2018 Share Posted October 6, 2018 Depending on how far you want to keep it "as built", I might be inclined to ditch that whole rear rail/davit/abomination and go for a whole new stainless rail. The present mountings on the deck might make that a non-starter though. Quote Link to comment Share on other sites More sharing options...
floydraser Posted October 6, 2018 Author Share Posted October 6, 2018 3 hours ago, annv said: Hi Floyd It will be easy to repair wonder why they cut it off, is/was it hinged? easier to drop the whole mast for a low bridge i would have thought or is the mast fixed so only needed to cut sufficient to clear bridge. Ref your rear rail, you could cut one of the round bars then hinge it to make rear/stern mooring easier,then fit a wide stepped ladder to access shore, it looks like you will have a few DIY jobs to sort out before next season, anything to keep you out of the pub hopefully and get brownie points from her indoors. enjoy. John Hi John, It's not hinged but has two holes and two S/S pins at the foot. The wire stays have string at the bottom ends and I presume it's all to make it easy to take it down for bridges. Goodness only knows why it was sawn off but whatever the reason the job wasn't completed. I can almost see the point of wanting it shorter as it is taller than the top of the cabin. Gives me something to play with in between trips to the boat I guess! Quote Link to comment Share on other sites More sharing options...
floydraser Posted October 6, 2018 Author Share Posted October 6, 2018 2 hours ago, Regulo said: Depending on how far you want to keep it "as built", I might be inclined to ditch that whole rear rail/davit/abomination and go for a whole new stainless rail. The present mountings on the deck might make that a non-starter though. That would look nice but I think as it's way down the priority list I think I'll just have a go at making look a bit more completed. I would to find a pic of it before the saw came out! Quote Link to comment Share on other sites More sharing options...
annv Posted October 6, 2018 Share Posted October 6, 2018 Davits are a pain on a broads boat, poke peoples eye out if stern moored or prevents you stern mooring if boat/dingy attached and unless you have a water tight cover over the tenda/dingy they fill up with water with dire consequences as drain hole gets blocked with leaves. John Quote Link to comment Share on other sites More sharing options...
Regulo Posted October 7, 2018 Share Posted October 7, 2018 If memory serves, did the original rail go right round, with a hinged lifting section in the middle? Something like the lifting bar counter access way. Think Del boy falling through. Quote Link to comment Share on other sites More sharing options...
Boatingman Posted October 7, 2018 Share Posted October 7, 2018 Hi Regulo You are correct certainly that was the case when I hired them Ray Quote Link to comment Share on other sites More sharing options...
floydraser Posted October 7, 2018 Author Share Posted October 7, 2018 These two drawings were among the paperwork handed over to me with the boat. I have heard mention of the Santa Caterinas before and Santa Margherita but never Gipsy? To further add to the mystery: the drawings refer to port and starboard bunks in the aft cabin, but the Owl has a single double bed. I'm just loading a Youtube video but it's taking for ever. Quote Link to comment Share on other sites More sharing options...
floydraser Posted October 7, 2018 Author Share Posted October 7, 2018 Here's the vid of the first time I laid eyes on her, the boat that is! 5 1 Quote Link to comment Share on other sites More sharing options...
Lulu Posted October 7, 2018 Share Posted October 7, 2018 Looking forward to seeing more videos as the restoration develops :) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.