MauriceMynah Posted October 26, 2019 Share Posted October 26, 2019 10 minutes ago, grendel said: fortunately the only damage was a pop stud pulled off the frame, and that was fixed with a bigger screw Resist it Mynah, resist it. 1 3 Quote Link to comment Share on other sites More sharing options...
Timbo Posted October 26, 2019 Share Posted October 26, 2019 RT safe and sound back in her moorings. Canopy is in one piece just a bit flappy with the wind! 2 Quote Link to comment Share on other sites More sharing options...
JanetAnne Posted October 26, 2019 Author Share Posted October 26, 2019 1 hour ago, Timbo said: RT safe and sound back in her moorings. Canopy is in one piece just a bit flappy with the wind! I guess we ain't mentioning the newly fitted idiot lights then? 2 Quote Link to comment Share on other sites More sharing options...
unclemike Posted October 26, 2019 Share Posted October 26, 2019 the idiot didn't know what they were for 1 Quote Link to comment Share on other sites More sharing options...
OldBerkshireBoy Posted October 26, 2019 Share Posted October 26, 2019 3 minutes ago, JanetAnne said: I guess we ain't mentioning the newly fitted idiot lights then? Well we are now, time to spill the beans JA, low oil pressure light? Quote Link to comment Share on other sites More sharing options...
unclemike Posted October 26, 2019 Share Posted October 26, 2019 at a guess red= power yellow = oil Quote Link to comment Share on other sites More sharing options...
grendel Posted October 26, 2019 Share Posted October 26, 2019 did you connect the horn up to the low oil pressure light (and have you found what the issue was with the old engine?) Quote Link to comment Share on other sites More sharing options...
Polly Posted October 26, 2019 Share Posted October 26, 2019 It was bust Quote Link to comment Share on other sites More sharing options...
OldBerkshireBoy Posted October 26, 2019 Share Posted October 26, 2019 43 minutes ago, grendel said: did you connect the horn up to the low oil pressure light (and have you found what the issue was with the old engine?) Was it bedded in? 1 Quote Link to comment Share on other sites More sharing options...
JanetAnne Posted October 26, 2019 Author Share Posted October 26, 2019 1 hour ago, grendel said: did you connect the horn up to the low oil pressure light (and have you found what the issue was with the old engine?) I did consider it but the horn doesn't work... That does remind me of a time at a classic car show when I swapped the indicator and horn wires on a friend's pride and joy so every time he indicated on the journey home.... parp parp parp 1 Quote Link to comment Share on other sites More sharing options...
grendel Posted October 27, 2019 Share Posted October 27, 2019 I did that to a friends allegro on his wedding day, wired the horn to the windscreen wipers so every time he went to wipe the windows - parp, then it was the shaving foam on the screen so he had to use them. Quote Link to comment Share on other sites More sharing options...
Timbo Posted October 27, 2019 Share Posted October 27, 2019 So, here's the early morning update. RT pumping at 9 minute intervals for 43 seconds. Dylan no1 beagle had a short seizure at 4.30 am, he's ok and after a walk and consuming half a pound of bacon has gone back to bed. Idiot lights, after some thought, the red one is the no smoking light. The yellow one comes on just before Scarlet Johansson brings me a cuppa, bacon sandwich and volunteers to do the varnishing. RT does not have a horn. Although if the yellow light ever comes on... The heating system is flashing lights. This may be why the beagles are now inside sleeping bags and I'm a bit cold! 1 1 Quote Link to comment Share on other sites More sharing options...
JanetAnne Posted October 27, 2019 Author Share Posted October 27, 2019 That dog is way too smart and a bloody good actor. He knew he was having that bacon long before you did 3 3 Quote Link to comment Share on other sites More sharing options...
JanetAnne Posted December 1, 2019 Author Share Posted December 1, 2019 Well the much awaited news on Royal Tudors old engine is here. I apologise for the poor quality pictures but they were taken whilst trying to not touch the camera with my oily hands Anyway, RT's engine hadn't sounded that happy back when she went in the water in 2018 and had, it seems, developed quite a thirst for oil since so it's final demise was unfortunate but maybe not such a surprise. The engine was certainly solid though. No movement could be found at all even removing flywheel bolts and front crank bolt were achieved without the need to hold anything so this was a major seize. We had needed to swap the sumps because my engine wouldn't fit RT in its current state meaning we had already established all the internal components were in their right places so let's have a closer look. The head looks OK. All valves closed and at the right heights so no issues here The timing chain had been considered as a possibility but with no scars on the cover it seemed unlikely to be the culprit. Nope, nothing wrong here.... With the head removed it was time to release the pistons. Number two big end bearing Marked but not a seized component by any stretch of the imagination Number three Again not perfect but not our problem Number one Aha!!! Number one big end bearing had melted and welded itself to the crankshaft. And there we have it. Basically Timbo's big end has failed. More later... 4 Quote Link to comment Share on other sites More sharing options...
grendel Posted December 1, 2019 Share Posted December 1, 2019 so was it a blocked oil way that caused the problem, this leading to the big end seizing? or low pump pressure, or just lack of oil? 1 Quote Link to comment Share on other sites More sharing options...
grendel Posted December 1, 2019 Share Posted December 1, 2019 does that mean a new crankshaft is needed or can that one be reground to repair it? Quote Link to comment Share on other sites More sharing options...
Maxwellian Posted December 1, 2019 Share Posted December 1, 2019 We ave been saying for ages that Timbo needs his big end repairing. 2 Quote Link to comment Share on other sites More sharing options...
FairTmiddlin Posted December 1, 2019 Share Posted December 1, 2019 And Ellie says. She doesn't know what the fuss is all about his big end. 1 2 Quote Link to comment Share on other sites More sharing options...
JanetAnne Posted December 1, 2019 Author Share Posted December 1, 2019 4 hours ago, grendel said: does that mean a new crankshaft is needed or can that one be reground to repair it? The crank is at standard so there is room for machining but whether there is enough material is up to my engine man and his micrometer. The pistons and bores are totally unmarked as are the little ends so it's looking like a rebuild of the existing engine rather than buying in a replacement. Just need to order some parts and, of course, a new prop cover and we can have RT back in her pre seized state. Quote Link to comment Share on other sites More sharing options...
Vaughan Posted December 1, 2019 Share Posted December 1, 2019 24 minutes ago, JanetAnne said: Just need to order some parts and, of course, a new prop cover and we can have RT back in her pre seized state. Still need to know why it seized, all the same. . . . Quote Link to comment Share on other sites More sharing options...
FairTmiddlin Posted December 1, 2019 Share Posted December 1, 2019 Possibly oil gallery blocked ? Quote Link to comment Share on other sites More sharing options...
JanetAnne Posted December 1, 2019 Author Share Posted December 1, 2019 38 minutes ago, Vaughan said: Still need to know why it seized, all the same. . . . We know the sump was empty and the oil pressure gauge was reading zero but presumed faulty. The oil pump has some scores in its sidewall and all the big end bearings have marking from running dry. That's all we actually know... My guess is that with number one big end being the furthest along the gallery from the pump that would seem the likeliest to be starved first. However, as this is only my fourth BMC to have apart (I can build old Ford's in my sleep lol) I welcome everyone's input and help. Quote Link to comment Share on other sites More sharing options...
WherryNice Posted December 1, 2019 Share Posted December 1, 2019 I think my main concern would be why/how did the sump come to be empty? mechanical issue? or just a normalish amount of consumption without being topped up over time? Quote Link to comment Share on other sites More sharing options...
MauriceMynah Posted December 1, 2019 Share Posted December 1, 2019 I regularly top up the oil in my engine every couple of years or so. 2 Quote Link to comment Share on other sites More sharing options...
annv Posted December 1, 2019 Share Posted December 1, 2019 Hi You need to check the oil pressure release valve piston its under the domed nut on side of block on the end of a spring there is a tool for reseatting it, its near the oil filter this is aluminium and can get seized/stuck with grit/dirt if oil and filter not regularly changed i would also suggest a tee piece so you can fit a oil pressure warning light with a alarm wired in parallel, the strainer on bottom of the pump suction tube can also get blocked if oil not changed regularly, it can get carboned up and restrict oil flow, when did you last check oil level? all this will be obvious when the sump comes off. the rocker cover breather can become blocked which will then force oil past rear oil seal especially if slinger is carbon up also. John 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.