Timbo Posted August 4, 2019 Share Posted August 4, 2019 Put away those naughty chemicals and heat guns Pauline! Random Orbital Sander Mouse detail sander Selection of sanding discs and pads A sharp card scraper Quote Link to comment Share on other sites More sharing options...
grendel Posted August 4, 2019 Share Posted August 4, 2019 for really tight areas consider using a stanley knife blade as a scraper, the trouble is you would really want a square end not a point, maybe a broken blade? Quote Link to comment Share on other sites More sharing options...
keifsmate Posted August 4, 2019 Share Posted August 4, 2019 1 hour ago, grendel said: for really tight areas consider using a stanley knife blade as a scraper, the trouble is you would really want a square end not a point, maybe a broken blade? An old single sided razor blade? They had a nice stiff back. Can you still get them? I have a beard so do not do a lot of shaving! Quote Link to comment Share on other sites More sharing options...
Polly Posted August 4, 2019 Author Share Posted August 4, 2019 I have a razor scraper as well as an ordinary one. Yes Timbo, I have both random orbital and mouse sanders ready to use next, but I LIKE my heat gun, it is very satisfying peeling off melted varnish, and it smells nice! I really do not like Nitromorse. 1 Quote Link to comment Share on other sites More sharing options...
Polly Posted August 6, 2019 Author Share Posted August 6, 2019 Sanding the first layers now. I will have done all the interior doors by this evening. My idea is to do everything I have here once then go back over it all with the next grades and the next. I like the Makita Random Orbital a lot; it is much better than our other sanders. Its less of a shake-up for a start, that means longer to work before you need to break off. I maybe need a better mouse sander; any suggestions? Quote Link to comment Share on other sites More sharing options...
Victoryv Posted August 6, 2019 Share Posted August 6, 2019 Use a ferret, bigger surface area, then apply varnish with a good sable brush, nothing easier than the rivulet finish, lovely! Do hammerite do varnish? save a lot of hard work. 1 Quote Link to comment Share on other sites More sharing options...
Polly Posted August 6, 2019 Author Share Posted August 6, 2019 Sadly Lynsey no longer has ferretsv, and they do bite..... Quote Link to comment Share on other sites More sharing options...
YnysMon Posted August 6, 2019 Share Posted August 6, 2019 Must admit...I’ve got to the point where I’ve completely lost it on this thread. Must be fun if you know about woodies though! Quote Link to comment Share on other sites More sharing options...
Polly Posted August 7, 2019 Author Share Posted August 7, 2019 Sorry Helen! I think the ferrets didn’t help! Brilliant has been at a standstill awhile. I am just picking up the thread myself with sorting all the locker tops and doors I brought back here to do. 3 Quote Link to comment Share on other sites More sharing options...
MauriceMynah Posted August 7, 2019 Share Posted August 7, 2019 Paint the new varnish straight over the old stuff and call it "part of her character" 3 Quote Link to comment Share on other sites More sharing options...
Polly Posted August 7, 2019 Author Share Posted August 7, 2019 Nope I am doing it best because the champion of varnish will see it. 1 1 Quote Link to comment Share on other sites More sharing options...
MauriceMynah Posted August 7, 2019 Share Posted August 7, 2019 I however never let my brushwork show. I call it "varnishing without trace" 2 Quote Link to comment Share on other sites More sharing options...
Polly Posted August 7, 2019 Author Share Posted August 7, 2019 Arghhhhh! Quote Link to comment Share on other sites More sharing options...
Polly Posted August 9, 2019 Author Share Posted August 9, 2019 Cabin doors before and after first sanding. 3 Quote Link to comment Share on other sites More sharing options...
SPEEDTRIPLE Posted August 10, 2019 Share Posted August 10, 2019 On 07/08/2019 at 09:15, MauriceMynah said: Paint the new varnish straight over the old stuff and call it "part of her character" Surely you must mean that new trendy word "patina"?. Quote Link to comment Share on other sites More sharing options...
KaptinKev Posted August 10, 2019 Share Posted August 10, 2019 10 hours ago, SPEEDTRIPLE said: Surely you must mean that new trendy word "patina"?. With some of these wrecks that we find on the broads, I'm surprised the owners haven't used that same word as an excuse as to why they haven't done any repairs! 2 Quote Link to comment Share on other sites More sharing options...
Vaughan Posted August 10, 2019 Share Posted August 10, 2019 4 minutes ago, KaptinKev said: With some of these wrecks that we find on the broads, I'm surprised the owners haven't used that same word as an excuse as to why they haven't done any repairs! In view of the gentle nature of this thread and its subject, I think you either need to explain that remark in greater detail, or withdraw it. Quote Link to comment Share on other sites More sharing options...
KaptinKev Posted August 10, 2019 Share Posted August 10, 2019 17 minutes ago, Vaughan said: In view of the gentle nature of this thread and its subject, I think you either need to explain that remark in greater detail, or withdraw it. I'm talking about some of the sunken wrecks or eyesores that you see on the broads. Also can you fill me in about the gentle nature and it's subject you're talking about? Quote Link to comment Share on other sites More sharing options...
YnysMon Posted August 10, 2019 Share Posted August 10, 2019 I thought Vaughan ‘s comment was spot on. The remark seemed a tad out though of place on this particular thread, though would have been fine on a thread about abandoned boats. Quote Link to comment Share on other sites More sharing options...
MauriceMynah Posted August 11, 2019 Share Posted August 11, 2019 Oh come on peeps, thread drift does that. I thought Cpt.Kevs post was a bloody good idea. I shall, in future refer to "Nyx and her wonderful green patina". 2 Quote Link to comment Share on other sites More sharing options...
Poppy Posted August 11, 2019 Share Posted August 11, 2019 On 09/08/2019 at 21:43, Polly said: Cabin doors before and after first sanding. Surely you'll be taking that escutcheon plate off first ? Quote Link to comment Share on other sites More sharing options...
Paul Posted August 11, 2019 Share Posted August 11, 2019 One of the most useful tools in these situations seems to have fallen out of fashion nowadays but for me you cannot beat a decent cabinet scraper. They can be awkward to sharpen until you get the hang of it but nothing gives such a good finish or prepares wood for refinishing more quickly. 1 Quote Link to comment Share on other sites More sharing options...
JennyMorgan Posted August 11, 2019 Share Posted August 11, 2019 Paul, a piece of glass is good and easily replaced when it becomes blunt! 1 Quote Link to comment Share on other sites More sharing options...
coolcat Posted August 11, 2019 Share Posted August 11, 2019 On 04/08/2019 at 18:14, ranworthbreeze said: One part meths, one part white vinegar, one part white spirit, half part linseed oil, shaken in a bottle . Regards Alan Ice and a slice with that? 2 Quote Link to comment Share on other sites More sharing options...
vanessan Posted August 11, 2019 Share Posted August 11, 2019 On 04/08/2019 at 18:14, ranworthbreeze said: One part meths, one part white vinegar, one part white spirit, half part linseed oil, shaken in a bottle . Are you sure it’s shaken, not stirred? 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.