garryn Posted December 16, 2018 Share Posted December 16, 2018 Plenty of clearance under Wroxham bridge today. Impossible to read the bottom of the gauge but must be somewhere near the 8ft Mark. 1 Quote Link to comment Share on other sites More sharing options...
LondonRascal Posted December 16, 2018 Share Posted December 16, 2018 Here is the video I posted on Facebook earlier this morning: 07439BE0-A101-4879-B3B9-C0C128A62AB7.MOV 3 Quote Link to comment Share on other sites More sharing options...
TheQ Posted December 17, 2018 Share Posted December 17, 2018 Standby for the Big fish kill when someone lets all the salt water back in.. 1 Quote Link to comment Share on other sites More sharing options...
Cal Posted December 17, 2018 Share Posted December 17, 2018 Hopefully no damage sustained to any boats!! Quote Link to comment Share on other sites More sharing options...
webntweb Posted December 17, 2018 Share Posted December 17, 2018 There's a pic in the other place showing Silverline's yard with their boats sat on the bottom with no water at all. Quote Link to comment Share on other sites More sharing options...
eddybear Posted December 17, 2018 Share Posted December 17, 2018 18 hours ago, garryn said: Plenty of clearance under Wroxham bridge today. Impossible to read the bottom of the gauge but must be somewhere near the 8ft Mark. Bloody typical Isn't my boat being ex-hire has got a note on the dashboard saying 7 foot six under all bridges except Wroxham that being eight-foot, I say bloody typical because the boat is now out of the water to be worked on never mind maybe next time it'll be in the water and I can do the Coltishall run here's hoping 1 Quote Link to comment Share on other sites More sharing options...
Markw Posted December 17, 2018 Share Posted December 17, 2018 3 hours ago, Cal said: Hopefully no damage sustained to any boats!! I was going to ask the question - with boats sat on the mud - presumably with the props and rudders now sunk in the mud - is any damage ever suffered because of this? - or with the mud being very soft - do boats tend to be ok? Quote Link to comment Share on other sites More sharing options...
grendel Posted December 17, 2018 Share Posted December 17, 2018 might be worth checking the weed filter next visit, in case everything is bunged up with mud. Quote Link to comment Share on other sites More sharing options...
Baitrunner Posted December 17, 2018 Share Posted December 17, 2018 This was the dyke going up to Silverline yesterday. 1 2 Quote Link to comment Share on other sites More sharing options...
Chelsea14Ian Posted December 17, 2018 Share Posted December 17, 2018 I spoke with Marina, in turn she contacted cove at Brundall. Over the weekend the water was very low.However now all boats are floating. Quote Link to comment Share on other sites More sharing options...
SPEEDTRIPLE Posted December 17, 2018 Share Posted December 17, 2018 Somebody posted a pic on faceache where a Buccaneer 37 had hung on its mooring lines, with the cleat eventually being ripped away from the deck, and with a chunk of moulding with it leaving a gaping hole in the deck. Quote Link to comment Share on other sites More sharing options...
NorfolkNog Posted December 17, 2018 Share Posted December 17, 2018 We were on the pontoon at OBYS on Saturday night. Probably just as well. OB didn't seem too bad but boats were high and dry on the private moorings at the top of Oulton Dyke. We moored at Somerleyton Sunday lunchtime but I think we were within a whisker of the bottom! Quote Link to comment Share on other sites More sharing options...
Regulo Posted December 17, 2018 Share Posted December 17, 2018 4 hours ago, Markw said: I was going to ask the question - with boats sat on the mud - presumably with the props and rudders now sunk in the mud - is any damage ever suffered because of this? - or with the mud being very soft - do boats tend to be ok? When I first bought Sunbird, she was moored at Aston's yard at Loddon, on the river side quay. We were regularly in the sticky stuff, and twice had to open the weed filter to de-plug the goo from the bottom of the fitting. But we did find the raw water impeller was missing a few fingers, so that might have not helped! Still, not good to have that mud running through the heat exchanger, though, so if you've been grounded, it might be as well to check that out when you get back to floaty business. 1 Quote Link to comment Share on other sites More sharing options...
Ray Posted December 17, 2018 Share Posted December 17, 2018 The keg, I believe that's the correct term, should protect the propeller and rudder while on the mud. The strong metal "arm" from the end of the keel to the bottom bearing of the rudder. Quote Link to comment Share on other sites More sharing options...
dnks34 Posted December 17, 2018 Share Posted December 17, 2018 Isnt it a Skeg?! 2 Quote Link to comment Share on other sites More sharing options...
ExSurveyor Posted December 17, 2018 Share Posted December 17, 2018 3 minutes ago, dnks34 said: Isnt it a Skeg?! Unless it is resting on a beer barrel. 2 2 Quote Link to comment Share on other sites More sharing options...
Vaughan Posted December 17, 2018 Share Posted December 17, 2018 36 minutes ago, dnks34 said: Isnt it a Skeg?! Yet another Scandinavian word which has passed into our boatbuilding since the Vikings first came to Norfolk. 4 Quote Link to comment Share on other sites More sharing options...
Vaughan Posted December 17, 2018 Share Posted December 17, 2018 Yes, I know, you're going to tell me that the Vikings didn't have propellors! But they did have skeg (or skaeg) rudders, shipped on pintles and gudgeons, to form a hinge. these are all words that go right back to "middle" English. 3 Quote Link to comment Share on other sites More sharing options...
BroadAmbition Posted December 18, 2018 Share Posted December 18, 2018 The photo kindly provided by Ray. The 'Strong Metal Arm' to me seems not to have any support at the aft end unless it is directly in front of the rudder and I can't see it. It just carries the lower pin for the rudder. If the lower arm was to sit on the bottom I would deduce that serious pressure from below would push the rudder trapping it between the arm and the underside of the hull. Having said that it is a good design to protect the prop and rudder from hitting objects in the water or the bottom of the river itself. 'B.A' has a very similar design but with a very strong 'Leg' at the end of the arm just fwd of the rudder between the arm and the underside of the hull where it fastens to the substantial rudder stock and the end of the keel / hog. This design means that even sitting on the bottom the pressure cannot squeeze the rudder / pin as per photo, Griff 3 1 Quote Link to comment Share on other sites More sharing options...
Ray Posted December 18, 2018 Share Posted December 18, 2018 I almost got it! In my defense I suspect Keg is a word I am more familiar with... especially at this time of year 2 4 Quote Link to comment Share on other sites More sharing options...
Smoggy Posted December 18, 2018 Share Posted December 18, 2018 Not everyone has the luxury of a skeg for protection but settling gently into soft mud shouldn't do any real harm as long as theres no hard lumps under your mooring. 2 Quote Link to comment Share on other sites More sharing options...
marshman Posted December 18, 2018 Share Posted December 18, 2018 Griff - that may be an issue if it were to sit on rock and it was bouncing up and down on it for some time, but you have to remember that the rivers in particular generally consist of MUD or at best boggy marsh!! Remember when they put in Lens new shed they went down about 70' with the piles and still did not hit anything much!! 1 Quote Link to comment Share on other sites More sharing options...
Cal Posted December 18, 2018 Share Posted December 18, 2018 10 hours ago, Ray said: The keg, I believe that's the correct term, should protect the propeller and rudder while on the mud. The strong metal "arm" from the end of the keel to the bottom bearing of the rudder. Here we have our keg. Note the lack however of a skeg! 4 Quote Link to comment Share on other sites More sharing options...
Cal Posted December 18, 2018 Share Posted December 18, 2018 Some years we are lucky and have two kegs 1 3 Quote Link to comment Share on other sites More sharing options...
ranworthbreeze Posted December 18, 2018 Share Posted December 18, 2018 9 minutes ago, Cal said: Some years we are lucky and have two kegs Hi Cal I expected to see at least one beer pump and lines connected to one of the kegs Regards Alan 1 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.